Tripp Lite B020-008 warranty Introduction, Front View of Console KVM Switch

Page 5

Introduction

Front View of Console KVM Switch

1.Handle

Pull to slide the KVM module out; push to slide the module in (see item 13 in this table).

2.LCD Display

After sliding the KVM module out, flip up the cover to access the LCD monitor.

3.LCD Controls

The LCD On/Off switch is located here, as well as buttons to control the position and picture settings of the LCD display. See p. 9 for details.

4.Port Switches

Press a switch to computer attached p. 11 for details.

bring the KVM focus to the to its corresponding port. See

5.Port LEDs (either 16 or 8 LEDs depending on model)

Two Port LEDs are built into the Port Switches. The one on the left is the On Line LED; the one on the right is the Selected Port LED:

•An On Line LED lights ORANGE to indicate that the computer attached to its corresponding port is up and running.

•A Selected LED lights GREEN to indicate that the computer attached to its corresponding port is the one that has the KVM focus. The LED is steady under normal conditions, but flashes when its port is accessed under Auto Scan Mode (see p. 12).

6.Keyboard

7.Touchpad

8.Power LED

Lights BLUE to indicate that the unit is receiving power.

9.Rack Mounting Tabs

The rack mounting tabs located at each corner of the unit secure the chassis to a system rack. Refer to Appendix D (p. 27), for rack mounting details.

10.Lock LEDs

The Num Lock, Caps Lock, Scroll Lock LEDs are located here.

11.Reset Switch

Located to the right of the Lock LEDs. Press this recessed switch in with a thin object to perform a system reset.

12.Firmware Upgrade Section

•Firmware Upgrade Port: The Firmware Upgrade Cable that transfers the firmware upgrade data from the administrator’s computer to the B020-008 or B020-016 plugs into this RJ-11 connector.

•Firmware Upgrade Switch: During normal operation this switch should be in the NORMAL position. (See p. 21 for firmware upgrading details.)

13.Slide Release

In order to bring the console out, you must first release it by sliding these tabs to the inside. See p. 10 for details on sliding the console in and out.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents This package should consist Table of Contents Overview Features IncludeComputer System RequirementsConsole for B022-016 only CablesIntroduction Front View of Console KVM SwitchStation ID LED Front View of B022-016Port LEDs Rear View for B022-016 Single-Station Installations InstallationMultiple Station Daisy-Chained Installation To set up a daisy-chained installationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationBasic Operation Manual Port SwitchingOpening the Console KVM Closing the Console KVMPort ID Numbering Powering Off and RestartingHot Plugging Invoking the Hotkey Mode Port Control Using HotkeysHotkeys Selecting the Active PortStarting Auto Scan Setting the Scan IntervalPausing in Auto Scan Hotkey Beeper Control Skip ModeHotkey Summary Table Port ID EnterOSD Navigation OSD On-Screen Display OperationOSD Overview OSD Functions OSD Main Screen HeadingsHeading Explanation F1 Go To GotoOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanBefore You Begin Firmware Upgrade UtilityTo prepare for the firmware upgrade, do the following To upgrade your firmware Starting the UpgradeFirmware Upgrade Recovery Upgrade SucceededUpgrade Failed Setting Default OSD Factory Default SettingsAppendix a Computer Connection TableSpecifications TroubleshootingSymptom Possible Cause Action Function B020-008 B020-016 B022-016Clear Log-in Information Appendix BAppendix D Appendix CFCC Radio/TV Interference Notice Appendix EOptional Rack Mounting Addendum

B020-008 specifications

The Tripp Lite B020-008 is an 8-port KVM switch designed to simplify the management of multiple servers and workstations from a single console. This device is especially beneficial for data centers, IT professionals, and businesses that require streamlined operations to enhance productivity and efficiency.

One of the main features of the B020-008 is its ability to control up to eight computers or servers using just one keyboard, monitor, and mouse. This not only saves space but also reduces the clutter usually associated with multiple workstations. The KVM switch supports various operating systems, including Windows, Linux, and Mac, making it a versatile solution for diverse IT environments.

The B020-008 employs advanced technology such as USB and VGA connections. Its USB compatibility ensures that users can easily connect modern peripherals, enhancing functionality without requiring additional hardware. The VGA support allows for clear video output at resolutions up to 1920 x 1440, ensuring crisp images and text, essential for tasks that require attention to detail.

Another notable characteristic is the hot-key switching capability, which enables users to toggle between connected computers simply by pressing a key combination. This feature significantly enhances workflow, allowing for quick transitions between tasks without the need to physically switch cables. Additionally, the KVM switch supports audio output, enabling users to manage sound from different computers without needing separate audio equipment.

The B020-008 is equipped with a sturdy metal housing designed for durability and longevity in demanding environments. It also comes with mounting options that allow for easy installation in rack-mounted systems, which is an essential requirement for many tech-savvy organizations.

Security features are another focal point; the KVM switch supports password protection to prevent unauthorized access, ensuring that sensitive information remains secure. It’s ideal for environments where data security is paramount.

In summary, the Tripp Lite B020-008 8-Port KVM switch stands out for its ease of use, multifunctionality, and robust design. With its capability to connect multiple computers, USB and VGA compatibility, hot-key switching, audio support, and built-in security features, it represents an ideal solution for managing complex IT ecosystems efficiently. This KVM switch is a reliable tool that helps enhance productivity and streamline operations for IT professionals.
Top Page Image Contents