4.Press function button (A), the indicators above function buttons (B) and (C) go off while the indicator above function button (A) continues to flash. The

display shows the current level (e.g. displayed = level 5 ).

5.To change the level, go on pressing function button (A) until the display shows the required level. Refer to the water hardness table.

6.Switch off the appliance to confirm the operation.

Filling with salt

Caution! Only use salt specifically designed for dishwasher use. All other types of salt, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, to remain on the bottom of the appliance for any period of time and cause corrosion.

5.Screw on the cap of the salt container by turning it clockwise until it stops with a click. Make sure that there is no trace of salt on the screw thread or on the gasket.

Do not worry if water overflows from the unit when filling with salt, this is quite normal.

Filling with rinse aid

1.Open the appliance door and remove the lower basket.

2.Unscrew the cap of the salt container by turning it anticlockwise.

3.Pour 1 litre of water into the container (this is necessary only before filling with salt for the first time).

4.Using the funnel provided, pour in the salt until the container is full.

30

MAX

20

4

3

2

1

 

 

-

+

 

 

12

Page 12
Image 12
John Lewis JLDW 1221 Filling with salt, Filling with rinse aid, Display shows the current level e.g. displayed = level