9.Put the filter (A) into position in filter
(B). Turn the filter (A) clockwise until it locks.
Caution! Never use the appliance without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and will result in damage to the appliance.
Spray arms
Caution! Never try to remove the upper spray arm.
If residue of soil has clogged the holes in the spray arms, remove the debris with a sharp pointed item (e.g. toothpick, cocktail stick).
Prolonged periods of non-operation
If you are not using the appliance for a prolonged period of time you are advised to:
•Unplug the appliance and then turn off the water.
•Leave the door ajar to prevent the formation of any unpleasant smells.
•Leave the inside of the appliance clean.
Frost precautions
Avoid placing the appliance in a location where the temperature is below 0 °C. If this is unavoidable, empty the appliance, close the door, disconnect the water inlet pipe and empty it.
Cleaning the appliance
External cleaning
Clean the external surfaces of the appliance and control panel with a damp soft cloth. If necessary use only neutral detergents.
Never use abrasive products, scouring pads or solvents, since these can damage the surfaces and plastic parts of the appliance.
Internal cleaning
Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
We recommend every 3 months you run the washing programme for heavy soiled dishes using detergent but without dishes.
Moving the appliance
If you have to move the appliance (e.g. moving house):
1.Unplug the appliance.
2.Turn the water tap off.
3.Remove the water inlet and discharge hoses.
4.Pull the appliance out together with the
hoses.
Avoid over tilting the appliance during transportation.
Something not working
The appliance does not start or it stops during operation.
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications
23
