Dishes can still be wet at the end of the programme when you open the appliance door. We recommend that you keep the door ajar and let the dishes dry.

Press this button to switch on the option. The related indicator comes on.

This function is available with all the washing programmes but has no impact on some programmes. Refer to ''Washing programmes''.

Delay start buttons

Press one of these buttons to delay the start of the washing programme from 1 to 24 hours. Refer to 'Select and start a washing programme'.

The display

The display shows:

The water hardness adjustment of the water softener.

The remaining time of the programme in progress.

The activation or deactivation of the rinse aid dispenser (only with the Multi tab function activated).

The end of a washing programme (the display shows a zero).

The countdown of the delay start.

The alarm codes related to a malfunction of the appliance.

Function buttons

The following operations can be done with these buttons:

The electronic setting of the water softener.

The cancellation of a washing programme in progress.

The activation or deactivation of the rinse aid dispenser (only with the Multi tab function activated).

Indicators

In addition to the programme indicators other indicators help you in the use of your appliance.

Multi tab

The indicator comes on when you

 

activate the Multi tab function.

 

 

Energy

The indicator comes on when you

save

activate the Energy save function.

 

 

Rinse aid

The indicator comes on when the

1)

rinse aid has run out.

 

 

Salt 1)

The indicator comes on when the

 

salt has run out.

 

The salt indicator can remain on

 

for a few hours after that salt has

 

been replenished (assuming the

 

appliance remains switched on).

 

The operation of the appliance is

 

not affected.

 

 

1)The salt and rinse aid indicators are never on while a washing programme is running even if filling with salt and/or rinse aid is necessary.

Setting mode

The appliance must be in setting mode for these operations:

To start a washing programme.

To start a delay start.

To adjust electronically the level of the water softener.

To activate or deactivate the rinse aid dispenser (only with the Multi tab function active).

Switch on the appliance. The appliance is in setting mode when:

• All the programme indicators come on.

8

Page 8
Image 8
John Lewis JLDW 1221 instruction manual Delay start buttons, Display, Function buttons, Indicators, Setting mode