Tripp Lite B020-008 Single-Station Installations, Multiple Station Daisy-Chained Installation

Page 8

Installation

Ensure that the power to all the devices you will be connecting is turned off. To prevent equipment damage caused by a ground potential difference, ensure that all devices on the installation are properly grounded.

Single-Station Installations:

A single-stage installation does not have any KVMs daisy-chained down from the first unit. To set up a sin- gle-stage installation, do the following:

1.Use the correct Tripp Lite KVM cable kits (as described in the Cables page 4), to connect a computer’s Keyboard, Video and Mouse ports to any available port on the KVM switch.

2.On a B022-016 KVM, connect the Keyboard, Mouse and Monitor cables to the console ports on the KVM.

16

15

14

13

12

11

10

9

 

 

 

 

 

 

 

CPU

8

7

6

5

4

3

2

1

3.Plug the power adapter cable into the KVM’s power jack, then plug the power adapter plug into a UPS, surge or other AC power source.

4.Turn on the power to the computers.

Multiple Station (Daisy-Chained) Installation

To control even more computers, up to 31 B022-016 KVM

Switches can be daisy-chained down from the First Station.

Note: As many as 512 computers can be controlled from the unit’s integrat-

B020-016 (rear)

ed console in a complete installation. Tables showing the relation between

 

the number of computers and the number of KVMs needed to control them

 

are provided in section A1in the Appendix.

 

To set up a daisy-chained installation:

1.Ensure that power to all the devices to be connected has been turned off.

2.Use a daisy-chain cable (described in Cables, page 4) to connect the Chain Out port of the parent unit to the Chain In port of the child unit.

3.Use a KVM cable kit (described in Cables, page 4) to connect the Keyboard, Video and Mouse ports of a computer to any available port on the KVM switch.

4.Repeat the above steps for any additional B022-016 KVM Switch you wish to add to the chain.

5.Power up the installation according to the following procedure:

a.Plug in the power adapter for the First Station. Wait a few seconds to allow the unit to determine its Station ID.

B022-016 (rear)

B022-016 (rear)

b. Plug in the power adapters for each subsequent Station in the installation in turn (ie. Second Station, then Third Station, etc.). Each B022-016 KVM Switch has an LED display on its front panel to indicate its Station ID (the Station ID for the First Station is 01, the ID for the Second Station is 02, the ID for the Third Station is 03, etc.).

In each case, wait for the Station ID to be displayed on the Station ID LED before plugging in the next Station.

c. After all the Stations are up, power on the computers.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents This package should consist Table of Contents Features Include OverviewSystem Requirements ComputerConsole for B022-016 only CablesFront View of Console KVM Switch IntroductionStation ID LED Front View of B022-016Port LEDs Rear View for B022-016 Installation Single-Station InstallationsMultiple Station Daisy-Chained Installation To set up a daisy-chained installationLCD OSD On-Screen Display Configuration LCD OSD allows you to set up and configure the LCD displayManual Port Switching Basic OperationOpening the Console KVM Closing the Console KVMPort ID Numbering Powering Off and RestartingHot Plugging Port Control Using Hotkeys Invoking the Hotkey ModeHotkeys Selecting the Active PortStarting Auto Scan Setting the Scan IntervalPausing in Auto Scan Skip Mode Hotkey Beeper ControlHotkey Summary Table Port ID EnterOSD Navigation OSD On-Screen Display OperationOSD Overview OSD Main Screen Headings OSD FunctionsHeading Explanation F1 Go To GotoF3 Set Environment SET OSD HotkeyF4 Administrator ADM PasswordF6 Broadcast Mode BRC F5 Skip SKPF7 Scan Scan F8 Log Out LoutBefore You Begin Firmware Upgrade UtilityTo prepare for the firmware upgrade, do the following Starting the Upgrade To upgrade your firmwareFirmware Upgrade Recovery Upgrade SucceededUpgrade Failed OSD Factory Default Settings Setting DefaultAppendix a Computer Connection TableTroubleshooting SpecificationsSymptom Possible Cause Action Function B020-008 B020-016 B022-016Appendix B Clear Log-in InformationAppendix C Appendix DFCC Radio/TV Interference Notice Appendix EOptional Rack Mounting Addendum

B020-008 specifications

The Tripp Lite B020-008 is an 8-port KVM switch designed to simplify the management of multiple servers and workstations from a single console. This device is especially beneficial for data centers, IT professionals, and businesses that require streamlined operations to enhance productivity and efficiency.

One of the main features of the B020-008 is its ability to control up to eight computers or servers using just one keyboard, monitor, and mouse. This not only saves space but also reduces the clutter usually associated with multiple workstations. The KVM switch supports various operating systems, including Windows, Linux, and Mac, making it a versatile solution for diverse IT environments.

The B020-008 employs advanced technology such as USB and VGA connections. Its USB compatibility ensures that users can easily connect modern peripherals, enhancing functionality without requiring additional hardware. The VGA support allows for clear video output at resolutions up to 1920 x 1440, ensuring crisp images and text, essential for tasks that require attention to detail.

Another notable characteristic is the hot-key switching capability, which enables users to toggle between connected computers simply by pressing a key combination. This feature significantly enhances workflow, allowing for quick transitions between tasks without the need to physically switch cables. Additionally, the KVM switch supports audio output, enabling users to manage sound from different computers without needing separate audio equipment.

The B020-008 is equipped with a sturdy metal housing designed for durability and longevity in demanding environments. It also comes with mounting options that allow for easy installation in rack-mounted systems, which is an essential requirement for many tech-savvy organizations.

Security features are another focal point; the KVM switch supports password protection to prevent unauthorized access, ensuring that sensitive information remains secure. It’s ideal for environments where data security is paramount.

In summary, the Tripp Lite B020-008 8-Port KVM switch stands out for its ease of use, multifunctionality, and robust design. With its capability to connect multiple computers, USB and VGA compatibility, hot-key switching, audio support, and built-in security features, it represents an ideal solution for managing complex IT ecosystems efficiently. This KVM switch is a reliable tool that helps enhance productivity and streamline operations for IT professionals.
Top Page Image Contents