Tripp Lite B020-008 warranty F5 Skip SKP, F6 Broadcast Mode BRC

Page 19

 

Setting

Function

 

 

 

 

 

SET ACCESSIBLE

Allows the Administrator to define a User’s access to the computers in the installation on a

 

PORTS

Port-by-Port basis. For each User, select the target Port and press the [Spacebar] to cycle

 

 

through the choices:

 

 

F (Full access), V (View Only), or blank. Repeat until all access rights have been set, then

 

 

press [Enter]. The default is V for all users on all Ports.

 

 

Note: A blank setting means that access rights have not been granted. The Port will not

 

 

appear on the User’s LIST on the Main Screen.

 

 

 

 

 

RESET STATION

The OSD settings will not correspond to a new configuration if the position of one of the

 

IDS

Stations in the daisy chain is changed.

 

 

This function directs the OSD to rescan the Station positions of the entire installation and

 

 

updates the OSD so that the OSD Station information corresponds to the new physical

 

 

layout.

 

 

Note: Only the Station Numbers get updated. All Administrator settings (such as Set

 

 

Accessible Ports, Set Quick View Ports, etc.), for all of the computers affected by the

 

 

change, have to be manually redone. The only exception to this is Port Names.

 

 

 

 

 

FIRMWARE

In order to upgrade the KVM’s firmware (see page 21-24), the Firmware Upgrade Mode

 

UPGRADE

must be invoked.

 

 

 

 

F5 Skip (SKP)

Invokes the Skip (SKP) Mode by clicking the F5 field or pressing [F5]. This function skips backward or forward—switching the console focus from the currently active computer port to the previous or next available one.

•The selection of computers to be available for Skip Mode switching is made with the Scan/Skip Mode setting under the F3 SET function (see page 17).

•When in the Skip Mode, press:

•[ ] to switch to the previous computer in the List

•[ ] to switch to the next computer in the List

•[ ] to switch to the last computer on the previous station in the List

•[ ] to switch to the first computer on the next station in the List.

Note: The Skip mode will only move to the previous or next available computer in the Scan/Skip Mode selection (see page 16).

•If a Port has been selected for Scan/Skip Mode, a Left/Right Triangle symbol appears before its Port ID Display (when the focus switches to that port), to indicate so.

•The console will not function while Skip Mode is in effect. The Skip Mode must be exited in order to regain control of the console.

•To exit Skip Mode, press [Esc] or [Spacebar].

F6 Broadcast Mode (BRC)

F6 is an Administrator only function. Clicking the F6 field, or pressing [F6], invokes Broadcast (BRC) Mode. When this function is in effect, commands sent from the console are broadcast to all available computers on the installation.

This function is particularly useful for operations that need to be performed on multiple computers, such as performing a system-wide shutdown, installing or upgrading software, etc.

BRC works in conjunction with the F2 LIST function. The LIST function (see page 16) lets you tailor the list of ports the OSD will display on the OSD Main Screen. When a command is broadcast, it is done only to the Ports currently displayed on the OSD Main Screen.

•A Speaker symbol appears before the Port ID Display to indicate BRC Mode is in effect.

•The mouse will not function while the BRC Mode is in effect. You must exit the BRC Mode in order to regain control of the mouse.

•To exit BRC Mode, invoke the OSD (with the OSD Hotkey), then Click the F6 field, or press [F6].

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents This package should consist Table of Contents Overview Features IncludeCables System RequirementsComputer Console for B022-016 onlyIntroduction Front View of Console KVM SwitchPort LEDs Front View of B022-016Station ID LED Rear View for B022-016 To set up a daisy-chained installation InstallationSingle-Station Installations Multiple Station Daisy-Chained InstallationLCD OSD allows you to set up and configure the LCD display LCD OSD On-Screen Display ConfigurationClosing the Console KVM Manual Port SwitchingBasic Operation Opening the Console KVMHot Plugging Powering Off and RestartingPort ID Numbering Selecting the Active Port Port Control Using HotkeysInvoking the Hotkey Mode HotkeysPausing in Auto Scan Setting the Scan IntervalStarting Auto Scan Port ID Enter Skip ModeHotkey Beeper Control Hotkey Summary TableOSD Overview OSD On-Screen Display OperationOSD Navigation F1 Go To Goto OSD Main Screen HeadingsOSD Functions Heading ExplanationOSD Hotkey F3 Set Environment SETPassword F4 Administrator ADMF5 Skip SKP F6 Broadcast Mode BRCF8 Log Out Lout F7 Scan ScanTo prepare for the firmware upgrade, do the following Firmware Upgrade UtilityBefore You Begin To upgrade your firmware Starting the UpgradeUpgrade Failed Upgrade SucceededFirmware Upgrade Recovery Computer Connection Table OSD Factory Default SettingsSetting Default Appendix aFunction B020-008 B020-016 B022-016 TroubleshootingSpecifications Symptom Possible Cause ActionClear Log-in Information Appendix BAppendix D Appendix COptional Rack Mounting Appendix EFCC Radio/TV Interference Notice Addendum

B020-008 specifications

The Tripp Lite B020-008 is an 8-port KVM switch designed to simplify the management of multiple servers and workstations from a single console. This device is especially beneficial for data centers, IT professionals, and businesses that require streamlined operations to enhance productivity and efficiency.

One of the main features of the B020-008 is its ability to control up to eight computers or servers using just one keyboard, monitor, and mouse. This not only saves space but also reduces the clutter usually associated with multiple workstations. The KVM switch supports various operating systems, including Windows, Linux, and Mac, making it a versatile solution for diverse IT environments.

The B020-008 employs advanced technology such as USB and VGA connections. Its USB compatibility ensures that users can easily connect modern peripherals, enhancing functionality without requiring additional hardware. The VGA support allows for clear video output at resolutions up to 1920 x 1440, ensuring crisp images and text, essential for tasks that require attention to detail.

Another notable characteristic is the hot-key switching capability, which enables users to toggle between connected computers simply by pressing a key combination. This feature significantly enhances workflow, allowing for quick transitions between tasks without the need to physically switch cables. Additionally, the KVM switch supports audio output, enabling users to manage sound from different computers without needing separate audio equipment.

The B020-008 is equipped with a sturdy metal housing designed for durability and longevity in demanding environments. It also comes with mounting options that allow for easy installation in rack-mounted systems, which is an essential requirement for many tech-savvy organizations.

Security features are another focal point; the KVM switch supports password protection to prevent unauthorized access, ensuring that sensitive information remains secure. It’s ideal for environments where data security is paramount.

In summary, the Tripp Lite B020-008 8-Port KVM switch stands out for its ease of use, multifunctionality, and robust design. With its capability to connect multiple computers, USB and VGA compatibility, hot-key switching, audio support, and built-in security features, it represents an ideal solution for managing complex IT ecosystems efficiently. This KVM switch is a reliable tool that helps enhance productivity and streamline operations for IT professionals.
Top Page Image Contents