Tripp Lite B022-U08-IP owner manual Remote Auto Scan

Page 21

6. KVM Operation (continued)

6.6.4 Remote Auto Scan

When Auto Scan Mode is invoked via the remote OSD toolbar, the KVM begins scanning according to the Scan Select and Scan Duration settings in the Configuration tab of the remote OSD. During an auto scan, normal keyboard and mouse functionality is suspended. Keyboard functionality is limited to the [Spacebar] key (exits auto scan at currently selected port), [Esc] key (exits auto scan at the currently selected port), [P] key (pauses auto scan at the currently selected port) and the [Ctrl], [Alt], [Delete] command for the local computer. Mouse functionality is limited to the auto scan toolbar, which replaces the remote OSD toolbar. The icons in the auto scan toolbar are described in the table:

Icon

Description

 

 

 

Indicates that the currently selected port is being accessed in Auto Scan Mode.

 

 

 

Pauses the auto scan at the currently selected port.

 

 

 

Exits auto scan at the currently selected port

 

 

 

Displays the port ID according to the Display Mode setting in the Configuration tab of the remote OSD or the F3 Set page of the local

 

OSD.

 

 

6.6.5 Panel Array Mode

Panel Array Mode allows connected computers to be simultaneously monitored by dividing the screen into a grid of panels, with each panel representing a KVM port. When Panel Array Mode is invoked via the remote OSD toolbar, it scans the connected computers per the Scan Select setting in the Configuration tab of the remote OSD.

A panel array toolbar is located in the lower right corner of the panel array mode screen. As with the other toolbars, the panel array mode toolbar can be dragged to anywhere on the screen. The table describes the icons located in the panel array toolbar:

Icon Description

Moves the focus of the panel array scan back four panels.

Moves the focus of the panel array scan back one panel.

Pauses the panel array mode scan, leaving the focus on the currently highlighted panel.

Moves the focus of the panel array scan forward one panel.

Moves the focus of the panel array scan forward four panels.

Increases the number of panels displayed in panel array mode.

Decreases the number of panels displayed in panel array mode.

Toggles the 4/3 aspect ratio.

Exits panel array mode at the currently highlighted port.

21

Image 21
Contents Model # B022-U08-IP Table of Contents FCC Information Package ContentsUser Notice IntroductionSupported operating systems are shown in the table, below System RequirementsComponents Installation General Safety InstructionsRack Mounting Safety Instructions Rack Mounting Instructions Single Stage InstallationGrounding Standard Rack MountingNetwork Setup-IP Address Configuration Multi-Stage Daisy-chain InstallationIP Installer DNS server field is optional Installation Local Console Login Powering Off and RestartingKVM Operation Sharing USB Peripheral DevicesKey Description Local Console Port AccessWhen Hotkey Mode has been invoked Invoking the Hotkey ModePort Control Hotkeys Other HotkeysSkip Mode Auto Scan ModeComputer Keyboard/Mouse Reset Hotkey Mode Invocation SequenceHotkey Operation Hotkey Command Description Logging Into the KVM over IPHotkey Summary Table Logging In via the AP Windows Client Web Browser and Non-Browser Remote Port Access Icon Description Port Access via Remote OSDWindows Mouse Synchronization ProceduresWindows XP / Server 2003 / Vista Windows MERemote Auto Scan Configuring the Hotkeys Hotkey SetupVideo Settings Action Hotkey DescriptionSetting Description Gamma AdjustmentVideo Auto Sync Gray ScaleCompose Panel User List PanelMessage Display Panel Ctrl-Alt-DelAdministration Local OSD Remote OSDUser ALL Local Console OSDPort that is currently active Local Console OSD F4 Administration ADM Local Console Firmware Upgrade Remote OSD Firmware Upgrade RecoveryRemote OSD Configuration Tab User Management General InformationNetwork Access Ports User Management Port AccessUser Management Permissions NetworkAnms Access RightsAnms LDAP/S Configuration Check the Enable Ldap Authentication checkboxInstall the Windows Support Tools Install the Active Directory Schema Snap-InAdministration Access Rights Description Permission Attribute ValueCharacter Description OpenLDAP Server Configuration OpenLDAP Server InstallationAnms OpenLDAP Server \Program Files\OpenLDAPLdap Data Stucture Customizing the OpenLDAP SchemaAnms Log Server Settings Using the New SchemaSecurity Default Webpage Name SecurityCustomization Login Failures Customization Firmware UpgradeCustomization Working Mode Customization Mouse Sync ModeReset Default Values Reset on ExitWeb Management Interface Customization I/OIP Address and DNS Server Access PortsDefault Webpage Name IP Installer SettingsRadius Settings LDAP/S Server Configuration Run Adsi Edit. Installed as part of the Support Tools Permission Attribute Value OpenLDAP Server Installation OpenLDAP ServerStarting the Open Ldap Server Ldap Data Structure Log Server SettingsClient Timeout Control Login FailurePermissions Working Mode Mouse Sync ModeReset Firmware Upgrade Backup Configuration / User AccountsRestore Configuration / User Accounts Configure Log ServerMenu Bar Options EventsHelp Log Server Main ScreenEvent Panel List PanelSpecification B022-U08-IP SpecificationsKeyboard Emulation OSD Default SettingsMac Keyboard Sun KeyboardFCC Notice, Class a Warranty Registration
Related manuals
Manual 16 pages 37.5 Kb