Tripp Lite B022-U08-IP owner manual Port that is currently active

7. Administration (continued)

7.1.2Local Console OSD F3 Settings (SET) Page (continued)

The settings in the F3 SET page are explained in the following table:

Setting	Description
OSD HOTKEY	Select the hotkey sequence that invokes the OSD (both Local Console OSD and Remote OSD); [Scroll Lock,
	Scroll Lock] or [Ctrl, Ctrl]. This is set to [Scroll Lock, Scroll Lock] by default.
PORT ID DISPLAY POSITION	This setting allows you to position the Port ID anywhere on the screen. The default is the upper left corner. When
	selected, the screen switches to the last selected port, and displays its Port ID. To position the Port ID, use the
	touchpad or the keyboard arrow keys, as well as the [Pg Up], [Pg Dn], [Home], [End], and [5] keys (on the numeric
	keypad with [Num Lock] off). When the Port ID is in the desired location, double-click or press the [Enter] key to
	lock it in position and return to the OSD.
	Note: The Port ID is set independently for each port on the installation. The position specified here only applies to
	the port that is currently active.
PORT ID DISPLAY DURATION	This selection gives you the option of displaying the Port ID for 3 seconds, or having the Port ID always off. The
	default is to display for 3 seconds.
PORT ID DISPLAY MODE	Select how the Port ID is displayed: Port Number only, Port Name only or both Port Number and Port Name. The
	default is to display both Port Number and Port Name.
SCAN DURATION	This setting determines the amount of time spent on each port when in Auto Scan Mode. Key in a value from 1 -
	255 seconds, and then press the [Enter] key. The default is 5 seconds; a setting of 0 (zero) disables the Auto Scan
	function altogether.
SCAN/SKIP MODE	Select which ports will be accessed during Auto Scan Mode and Skip Mode.
	• ALL : All ports that are accessible to the currently logged-on user
	• POWERED ON: All ports that are both accessible to the currently logged in user and powered-on
	• QUICK VIEW: Ports that are set as Quick View ports by an administrator
	• QUICK VIEW + POWERED ON: Ports that are both set as Quick View ports by an administrator and are powered
	on The default setting is ALL.
SCREEN BLANKER	If the console is left idle for the amount of time set with this function, the screen is blanked. Key in a value from 1 -
	30 minutes, and then press the [Enter] key. A setting of 0 disables this function. The default is 0 (disabled).
HOTKEY COMMAND MODE	Enables / Disables the hotkey command function. Hotkey Command Mode is enabled by default.
HOTKEY	Toggle between the two Hotkey Mode invocation sequences. Options are [Num Lock, Minus] and [Ctrl, F12].
OSD LANGUAGE	Determines which language the OSD menus are displayed in. Choices are English, Spanish, French, German and
	Japanese.

27