Tripp Lite B022-U08-IP owner manual FCC Information, User Notice, Package Contents, Introduction

Page 3

1. FCC Information

This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

2. User Notice

All information, documentation and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer’s software described in this manual is sold or licensed “as is.” Should the programs prove defective following their purchase, the buyer (and not the manufacturer, its distributor or its dealer), assumes the entire cost of all necessary servicing, repair and any incidental or consequential damages resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV interference caused by unauthorized modifications to this device. It is the responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation of this system if the correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT BEFORE USE.

3. Package Contents

This package consists of:

 

 

B022-U08-IP KVM Switch

External Power Supply

6 ft. USB/PS2 Combo KVM Cable Kits (x2)

Rubber Feet

USB/PS2 Combo Console Cable Kit

• CD with Owner’s Manual, Quick Start Guide and Device Files

RJ11 to DB9 Firmware Upgrade Cable

Quick Start Guide

Rackmount Hardware

 

 

Check to make sure that all of the components are present and in good order. If anything is missing, or was damaged in shipping, contact your dealer.

Read this manual thoroughly and follow the installation and operation procedures carefully to prevent any damage to the switch or to any other devices in the installation.

4. Introduction

4.1Features

1U Rackmount KVM Switch with built-in IP access.

Connect either USB or PS/2 computers using P778-Series USB/PS2 Combo KVM Cable Kits – no need for separate cable kits.

Control up to 8 computers on a single KVM switch.

Daisy-chain multiple KVM switches together to increase the number of connected computers. An additional 15 KVM switches can be daisy-chained from the B022-U08-IP for a total of 248 connected computers.

Remotely access computers via LAN, WAN or Internet via the Windows™ or Java browser clients.

AP Windows and Java clients allow the KVM to be remotely accessed via the network without going through a browser.

External USB 1.1 port allows USB peripheral devices to be shared amongst connected computers.

Grayscale feature allows you to view remote sessions in black and white, reducing the amount of data traveling over the network and improving keyboard/mouse response time over IP.

Web management interface, OSD and toolbars provide convenient, user-friendly operation.

3-level security (Admin, User and Select) – up to 64 accounts can be created.

Panel Array Mode – remotely monitor multiple ports at the same time.

Message board feature allows users who are logged in at the same time to communicate with each other and manage port access.

CD includes a Windows-based log server that records events on the installation and writes them to a searchable database.

Supports RADIUS and LDAP/S authentication.

Flash firmware upgradable via network and included firmware upgrade cable.

Supports both IPv4 and IPv6.

Supports Link Local IPv6 Address and IPv6 Stateless Auto configuration protocol.

Web Management Interface, Remote OSD and Local OSD can be displayed in English, Spanish, French, German and Japanese.

Advanced encryption technologies: 128-bit SSL, 128-bit RC4, 1024-bit RSA, 56-bit DES, 256-bit AES, 168-bit 3DES.

Video resolutions up to 2048 x 1536, DDC2B are supported at the local console. Video resolutions up to 1600 x 1200 @ 60Hz,

24-bit color depth are supported at the remote console.

3

 

Image 3
Contents Model # B022-U08-IP Table of Contents Introduction Package ContentsFCC Information User NoticeSupported operating systems are shown in the table, below System RequirementsComponents Installation General Safety InstructionsRack Mounting Safety Instructions Standard Rack Mounting Single Stage InstallationRack Mounting Instructions GroundingNetwork Setup-IP Address Configuration Multi-Stage Daisy-chain InstallationIP Installer DNS server field is optional Installation Sharing USB Peripheral Devices Powering Off and RestartingLocal Console Login KVM OperationKey Description Local Console Port AccessOther Hotkeys Invoking the Hotkey ModeWhen Hotkey Mode has been invoked Port Control HotkeysHotkey Mode Invocation Sequence Auto Scan ModeSkip Mode Computer Keyboard/Mouse ResetHotkey Operation Hotkey Command Description Logging Into the KVM over IPHotkey Summary Table Logging In via the AP Windows Client Web Browser and Non-Browser Remote Port Access Icon Description Port Access via Remote OSDWindows ME Mouse Synchronization ProceduresWindows Windows XP / Server 2003 / VistaRemote Auto Scan Action Hotkey Description Hotkey SetupConfiguring the Hotkeys Video SettingsGray Scale Gamma AdjustmentSetting Description Video Auto SyncCtrl-Alt-Del User List PanelCompose Panel Message Display PanelAdministration Local OSD Remote OSDUser ALL Local Console OSDPort that is currently active Local Console OSD F4 Administration ADM Local Console Firmware Upgrade Remote OSD Firmware Upgrade RecoveryRemote OSD Configuration Tab User Management General InformationNetwork User Management Port AccessNetwork Access Ports User Management PermissionsAnms Access RightsInstall the Active Directory Schema Snap-In Check the Enable Ldap Authentication checkboxAnms LDAP/S Configuration Install the Windows Support ToolsAdministration Access Rights Description Permission Attribute ValueCharacter Description \Program Files\OpenLDAP OpenLDAP Server InstallationOpenLDAP Server Configuration Anms OpenLDAP ServerLdap Data Stucture Customizing the OpenLDAP SchemaSecurity Using the New SchemaAnms Log Server Settings Security Default Webpage NameCustomization Mouse Sync Mode Customization Firmware UpgradeCustomization Login Failures Customization Working ModeCustomization I/O Reset on ExitReset Default Values Web Management InterfaceIP Address and DNS Server Access PortsDefault Webpage Name IP Installer SettingsRadius Settings LDAP/S Server Configuration Run Adsi Edit. Installed as part of the Support Tools Permission Attribute Value OpenLDAP Server Installation OpenLDAP ServerStarting the Open Ldap Server Ldap Data Structure Log Server SettingsClient Timeout Control Login FailurePermissions Working Mode Mouse Sync ModeReset Firmware Upgrade Backup Configuration / User AccountsRestore Configuration / User Accounts Configure Log ServerMenu Bar Log Server Main Screen EventsOptions HelpEvent Panel List PanelSpecification B022-U08-IP SpecificationsSun Keyboard OSD Default SettingsKeyboard Emulation Mac KeyboardFCC Notice, Class a Warranty Registration
Related manuals
Manual 16 pages 37.5 Kb