Tripp Lite B070-008-19, B070-016-19 owner manual Firmware Upgrade, Tuning F5, Moving the Label F6

Page 18

Operation (continued)

Tuning (F5)

You can tune the image of any remote computer screen.

To adjust the screen image:

1.In the OSD Main Menu highlight the computer you want to adjust.

2.Press the [F5] key. The screen image of the selected computer is displayed, along with the Image Tuning label.

3.Adjust the image by using the Right and Left Arrow keys.

4.When the image is satisfactory, press [Esc].

Note! Distance affects picture quality. The further away a remote computer is from the KVM, the lower the image quality and the more tuning needed. Therefore put any higher resolution computers closer to the KVM.

Moving the Label (F6)

You can position the OSD label anywhere on the screen.

To position the label from the Main window:

1.Move to the desired computer using the Up and Down Arrow keys.

2.Press the [F6] key. The selected screen image and Identification label are displayed.

3.Use the arrow keys to move the label to the desired position.

4.Press [Esc] to save and exit.

Firmware Upgrade

Firmware Upgrade System Requirements:

Windows 2000 or higher operating system

Pentium 166 or higher with 16MB RAM and 10MB free hard drive space

Available DB9 serial port

Upgrading the KVM Firmware

The NetCommander KVM Firmware Upgrade Utility allows you to upgrade both the KVM and Server Interface Units (SIUs). Each KVM in a cascade installation must be upgraded individually. When done upgrading the first KVM in the installation, perform the upgrade procedure on each subsequent KVM. To upgrade your firmware, follow the steps below:

1.Make sure that the Serial Port setting in the OSD General Settings menu is set to On. This makes the serial port on the back of the KVM switch available for use in a firm- ware upgrade.

2.Using the included RJ11 to DB9 firmware upgrade cable, connect the upgrade port on the back of the unit to an available serial port on a computer that is not connected to the KVM.

18

201002116 93-2925.indd 18

3/15/2010 11:48:48 AM

Image 18
Contents NetCommander Cat5 Rackmount Console KVM Switches Table of Contents Features AccessoriesPackage Includes Configuration Front ViewKeyboard Connecting the NetCommander KVM System InstallationPre-Installation Guidelines Rear ViewNetCommander Server Interface Unit SIU NetCommander Server Interface UnitConnecting the Power Supply Resetting the KVM SwitchRackmount Considerations Rackmounting the NetCommander KVMAmbient Operating Temperature AirflowCascading NetCommander KVM Switches Cascading NetCommander KVM switchesOperation Basic OperationKeyboard Hotkeys Navigating the OSD OSD Settings F2On-Screen Display Selecting a ComputerGeneral Settings SecurityChanging the OSD Hotkey Auto Skip Serial PortChanging the Keyboard Language Reset OSD General Settings Menu to Defaults F7 Ports SettingsTime Settings Time settings windowSecurity Settings Security SettingsSecurity User Settings OSD Help Window F1Scanning Computers F4 Firmware Upgrade System Requirements Firmware UpgradeTuning F5 Moving the Label F6Firmware Upgrade 201002116 93-2925.indd 15/2010 114849 AM KVM Switch/SIU Reset Troubleshooting Electricity failureMonitor Screen Failure Specifications USB/SUN Combo KeysFCC Radio/TV Interference Notice Year Limited Warranty Warranty RegistrationConsola Multiplexor KVM para Rack NetCommander Cat5 Contenido Características Contenidos del paqueteAccesorios Configuración Vista FrontalTeclado Vista Frontal continuación Configuración continuaciónInstalación Vista TraseraConectando el Sistema KVM NetCommander Unidad de Interfaz de Servidor SIU NetCommanderConectando el Suministro de Energía Restaurando el Multiplexor KVMTemperatura Ambiente de Operación Instalando en un Rack el KVM NetCommanderConsideraciones para la Instalación en Rack Circulación de AireCascadeando los Multiplexores KVM NetCommander Figura 6 Cascadeando Multiplexores KVM NetCommanderOperación Operación BásicaTeclas Rápidas Seleccionando una Computadora Menú en Pantalla OSDNavegando el Menú en Pantalla OSD Ajustes con el Menú en Pantalla OSD F2Parámetros Generales Seguridad SecurityCambiando las Teclas Rápidas del Menú en Pantalla OSD Operación continuación Cambiando el Idioma del Teclado Auto Skip Salto AutomáticoPuerto Serial Editando el Nombre del MultiplexorValores del Puerto Ports Settings Editando el Nombre de la ComputadoraEditando la Columna del Teclado KB Valores de Tiempo Time Settings Figura 12 Ventana de Valores de Tiempo Time SettingsSeguridad Parámetros de Seguridad Security Settings Parámetros del Usuario User SettingsParámetros de Seguridad Ajuste de la Pantalla Tuning F5 Ventana de Ayuda Help del Menú en Pantalla OSD F1Escaneando las Computadoras F4 Requisitos del sistema de actualización del firmware Actualización del firmwareMoviendo el Rótulo F6 Actualización del firmware de KVMActualización del firmware continuación Actualización del firmware continuación Solución de Problemas Restablecimiento del multiplexor KVM/SIUFalla del Suministro Eléctrico Combinación de Teclas Combo Keys Falla de la Pantalla del MonitorTecla SUN Combo key Especificaciones Aviso de la FCC sobre la interferencia de Radio/TV Garantía Limitada por 1 AñoManuel du propriétaire Table des matières Accessoires CaractéristiquesContenu de l’emballage Vue de face ClavierVue de face suite Configuration suiteDirectives de pré-installation Vue arrièreModule dinterface serveur NetCommander Installation suiteConnexion du système KVM NetCommander Le module dinterface serveur NetCommanderConnexion de lalimentation électrique Réinitialisation du commutateur KVMTempérature ambiante de fonctionnement Montage en bâti du KVM NetCommanderConsidérations sur le montage en bâti Circulation dairCascadage des commutateurs KVM NetCommander Cascadage des commutateurs KVM NetCommanderUtilisation Utilisation de baseRaccourcis clavier Navigation dans laffichage à lécran Utilisation suiteAffichage à lécran Selection dun ordinateurParamètres généraux SécuritéChanger le raccourci clavier de laffichage à lécran Changer la langue du clavier Saut automatiquePort série Modification du nom du commutateurParamètres des ports Modification du nom de lordinateurModifier la colonne du clavier Paramètres de la chronologie Fenêtre des paramètres de la chronologieSécurité Paramètres de sécuritéParamètres de sécurité Fenêtre dAIDE daffichage à lécran F1 Balayage des ordinateurs F4Paramètres dutilisateur Mise au point F5 Déplacement de létiquette F6Mise à niveau du micrologiciel Exigences système pour la mise à niveau du micrologicielMise à niveau du micrologiciel suite Mise à niveau du micrologiciel suite Mise à niveau du micrologiciel suite Dépannage Panne délectricitéPanne décran du moniteur Touches combinées USB/SUN Caractéristiques techniques 201002116 932925-FR
Related manuals
Manual 1 pages 43.68 Kb Manual 24 pages 5.57 Kb

B070-016-19, B070-008-19 specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.