Tripp Lite B070-016-19, B070-008-19 owner manual Rear View, Pre-Installation Guidelines

Page 5

Configuration (continued)

Rear View

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

2

 

3

 

 

4

 

5

 

 

6

 

Figure 3 NetCommander KVM rear panel

1Power Socket: The power cord plugs in here from the AC power source.

2On/Off Switch: Turns the KVM Switch on and off.

3Firmware Upgrade Port: Plug included firmware upgrade cable into this port to down- load firmware upgrade data.

4CPU Port Section: Plug the Cat5e cables from each PC or server into these ports.

5KVM Console Ports*

6Integrated Console Ports*

* The KVM comes with a Jumper Cable to connect the Integrated Console Ports to the KVM Console Ports. This cable must be connected for the unit to function. Do not remove the Jumper Cable unless you are installing a Tripp

Lite B050-000 or B051-000 IP Remote Access Unit. See the IP Remote Access Unit connection instructions on page 10 for details.

Installation

Pre-Installation Guidelines

Switch off all computers*

The KVM comes with a Jumper Cable to connect the Integrated Console Ports to

the KVM Console Ports. This cable must be connected for the unit to function. Do not remove the Jumper Cable unless you are installing a Tripp Lite B050-000 or B051-000 IP

Remote Access Unit. See the IP Remote Access Unit connection instructions on page 10 for details.

Ensure that the cables are not close to any sources of electrical noise interference such as fluorescent lights, HVAC systems or motors

Ensure that the distance between any computer and the KVM switch does not exceed 100 ft.

*PS/2 computers need to have the Keyboard and Mouse connectors installed before they are turned on. If you plug the Keyboard and Mouse connectors into an active PS/2 computer, it may not recognize them, causing them not to work.

Connecting the NetCommander KVM System

Connect each computer to the KVM switch using a Tripp Lite B078-101-PS2* or B078-101-USB* Server Interface Unit (SIU) and a Cat5e patch cable.

* Cat5 cable should be no longer than 100 ft..

5

201002116 93-2925.indd 5

3/15/2010 11:48:41 AM

Image 5
Contents NetCommander Cat5 Rackmount Console KVM Switches Table of Contents Package Includes FeaturesAccessories Keyboard ConfigurationFront View Pre-Installation Guidelines InstallationConnecting the NetCommander KVM System Rear ViewNetCommander Server Interface Unit NetCommander Server Interface Unit SIUResetting the KVM Switch Connecting the Power SupplyAmbient Operating Temperature Rackmounting the NetCommander KVMRackmount Considerations AirflowCascading NetCommander KVM switches Cascading NetCommander KVM SwitchesKeyboard Hotkeys OperationBasic Operation On-Screen Display OSD Settings F2Navigating the OSD Selecting a ComputerChanging the OSD Hotkey General SettingsSecurity Changing the Keyboard Language Auto SkipSerial Port Ports Settings Reset OSD General Settings Menu to Defaults F7Time settings window Time SettingsSecurity Security SettingsSecurity Settings Scanning Computers F4 User SettingsOSD Help Window F1 Tuning F5 Firmware UpgradeFirmware Upgrade System Requirements Moving the Label F6Firmware Upgrade 201002116 93-2925.indd 15/2010 114849 AM KVM Switch/SIU Reset Monitor Screen Failure TroubleshootingElectricity failure USB/SUN Combo Keys SpecificationsWarranty Registration FCC Radio/TV Interference Notice Year Limited WarrantyConsola Multiplexor KVM para Rack NetCommander Cat5 Contenido Accesorios CaracterísticasContenidos del paquete Teclado ConfiguraciónVista Frontal Instalación Configuración continuaciónVista Frontal continuación Vista TraseraUnidad de Interfaz de Servidor SIU NetCommander Conectando el Sistema KVM NetCommanderRestaurando el Multiplexor KVM Conectando el Suministro de EnergíaConsideraciones para la Instalación en Rack Instalando en un Rack el KVM NetCommanderTemperatura Ambiente de Operación Circulación de AireFigura 6 Cascadeando Multiplexores KVM NetCommander Cascadeando los Multiplexores KVM NetCommanderTeclas Rápidas OperaciónOperación Básica Navegando el Menú en Pantalla OSD Menú en Pantalla OSDSeleccionando una Computadora Ajustes con el Menú en Pantalla OSD F2Cambiando las Teclas Rápidas del Menú en Pantalla OSD Parámetros GeneralesSeguridad Security Operación continuación Puerto Serial Auto Skip Salto AutomáticoCambiando el Idioma del Teclado Editando el Nombre del MultiplexorEditando la Columna del Teclado KB Valores del Puerto Ports SettingsEditando el Nombre de la Computadora Figura 12 Ventana de Valores de Tiempo Time Settings Valores de Tiempo Time SettingsSeguridad Parámetros de Seguridad Parámetros de Seguridad Security SettingsParámetros del Usuario User Settings Escaneando las Computadoras F4 Ajuste de la Pantalla Tuning F5Ventana de Ayuda Help del Menú en Pantalla OSD F1 Moviendo el Rótulo F6 Actualización del firmwareRequisitos del sistema de actualización del firmware Actualización del firmware de KVMActualización del firmware continuación Actualización del firmware continuación Falla del Suministro Eléctrico Solución de ProblemasRestablecimiento del multiplexor KVM/SIU Tecla SUN Combo key Combinación de Teclas Combo KeysFalla de la Pantalla del Monitor Especificaciones Garantía Limitada por 1 Año Aviso de la FCC sobre la interferencia de Radio/TVManuel du propriétaire Table des matières Contenu de l’emballage AccessoiresCaractéristiques Clavier Vue de faceDirectives de pré-installation Configuration suiteVue de face suite Vue arrièreConnexion du système KVM NetCommander Installation suiteModule dinterface serveur NetCommander Le module dinterface serveur NetCommanderRéinitialisation du commutateur KVM Connexion de lalimentation électriqueConsidérations sur le montage en bâti Montage en bâti du KVM NetCommanderTempérature ambiante de fonctionnement Circulation dairCascadage des commutateurs KVM NetCommander Cascadage des commutateurs KVM NetCommanderRaccourcis clavier UtilisationUtilisation de base Affichage à lécran Utilisation suiteNavigation dans laffichage à lécran Selection dun ordinateurSécurité Paramètres générauxChanger le raccourci clavier de laffichage à lécran Port série Saut automatiqueChanger la langue du clavier Modification du nom du commutateurModifier la colonne du clavier Paramètres des portsModification du nom de lordinateur Fenêtre des paramètres de la chronologie Paramètres de la chronologieParamètres de sécurité SécuritéParamètres de sécurité Paramètres dutilisateur Fenêtre dAIDE daffichage à lécran F1Balayage des ordinateurs F4 Mise à niveau du micrologiciel Déplacement de létiquette F6Mise au point F5 Exigences système pour la mise à niveau du micrologicielMise à niveau du micrologiciel suite Mise à niveau du micrologiciel suite Mise à niveau du micrologiciel suite Panne décran du moniteur DépannagePanne délectricité Touches combinées USB/SUN Caractéristiques techniques 201002116 932925-FR
Related manuals
Manual 1 pages 43.68 Kb Manual 24 pages 5.57 Kb

B070-016-19, B070-008-19 specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.