Tripp Lite B070-008-19, B070-016-19 Troubleshooting, Electricity failure, Monitor Screen Failure

Page 22

Troubleshooting

Note: Disconnect device from AC mains before service operation!

When using Firmware Update software you may at times get a Communication Error message.

If a Communication Error message does appear during the update procedure, do the following:

1.Ensure that the RS232 Serial cable's RS232 connector is connected to the Switch's Communication port.

2.Ensure that the RS232 Serial cable's DB9F connector is connected to the DB9M Serial port on the CPU's rear panel.

3.Restart the download process.

Electricity failure

If the electricity fails during an update to the KVM firmware, do the following:

1.If the electricity fails while the switch firmware is updating, a Communication Error message will appear. Simply resume the firmware update by opening the folder that contains the firmware update file and continue from there.

2.If the electricity fails while the Server Interface Unit firmware is updating, a Not Responding or Upgrade Error message will appear. Restart the upgrade from the beginning.

Monitor Screen Failure

In the event that one of the connected computers does not display an image on the console monitor (your monitor may display an error message saying 'Unable to Display Video Mode'), you may need to update the DDC Information from the console monitor. To do this, follow these steps:

1.Remove the SIU VGA Connectors from all connected computers. Leave the USB or PS/2 connectors attached

2.Open the OSD Main Menu and press the F10 key. The OSD will flash the message

'Please Wait.' When that message stops, the update has taken place

3.Reconnect the SIU VGA Connectors of all the attached computers. You should now be able to display video from all computers

22

201002116 93-2925.indd 22

3/15/2010 11:48:49 AM

Image 22
Contents NetCommander Cat5 Rackmount Console KVM Switches Table of Contents Accessories FeaturesPackage Includes Front View ConfigurationKeyboard Connecting the NetCommander KVM System InstallationPre-Installation Guidelines Rear ViewNetCommander Server Interface Unit SIU NetCommander Server Interface UnitConnecting the Power Supply Resetting the KVM SwitchRackmount Considerations Rackmounting the NetCommander KVMAmbient Operating Temperature AirflowCascading NetCommander KVM Switches Cascading NetCommander KVM switchesBasic Operation OperationKeyboard Hotkeys Navigating the OSD OSD Settings F2On-Screen Display Selecting a ComputerSecurity General SettingsChanging the OSD Hotkey Serial Port Auto SkipChanging the Keyboard Language Reset OSD General Settings Menu to Defaults F7 Ports SettingsTime Settings Time settings windowSecurity Settings Security SettingsSecurity OSD Help Window F1 User SettingsScanning Computers F4 Firmware Upgrade System Requirements Firmware UpgradeTuning F5 Moving the Label F6Firmware Upgrade 201002116 93-2925.indd 15/2010 114849 AM KVM Switch/SIU Reset Electricity failure TroubleshootingMonitor Screen Failure Specifications USB/SUN Combo KeysFCC Radio/TV Interference Notice Year Limited Warranty Warranty RegistrationConsola Multiplexor KVM para Rack NetCommander Cat5 Contenido Contenidos del paquete CaracterísticasAccesorios Vista Frontal ConfiguraciónTeclado Vista Frontal continuación Configuración continuaciónInstalación Vista TraseraConectando el Sistema KVM NetCommander Unidad de Interfaz de Servidor SIU NetCommanderConectando el Suministro de Energía Restaurando el Multiplexor KVMTemperatura Ambiente de Operación Instalando en un Rack el KVM NetCommanderConsideraciones para la Instalación en Rack Circulación de AireCascadeando los Multiplexores KVM NetCommander Figura 6 Cascadeando Multiplexores KVM NetCommanderOperación Básica OperaciónTeclas Rápidas Seleccionando una Computadora Menú en Pantalla OSDNavegando el Menú en Pantalla OSD Ajustes con el Menú en Pantalla OSD F2Seguridad Security Parámetros GeneralesCambiando las Teclas Rápidas del Menú en Pantalla OSD Operación continuación Cambiando el Idioma del Teclado Auto Skip Salto AutomáticoPuerto Serial Editando el Nombre del MultiplexorEditando el Nombre de la Computadora Valores del Puerto Ports SettingsEditando la Columna del Teclado KB Valores de Tiempo Time Settings Figura 12 Ventana de Valores de Tiempo Time SettingsSeguridad Parámetros del Usuario User Settings Parámetros de Seguridad Security SettingsParámetros de Seguridad Ventana de Ayuda Help del Menú en Pantalla OSD F1 Ajuste de la Pantalla Tuning F5Escaneando las Computadoras F4 Requisitos del sistema de actualización del firmware Actualización del firmwareMoviendo el Rótulo F6 Actualización del firmware de KVMActualización del firmware continuación Actualización del firmware continuación Restablecimiento del multiplexor KVM/SIU Solución de ProblemasFalla del Suministro Eléctrico Falla de la Pantalla del Monitor Combinación de Teclas Combo KeysTecla SUN Combo key Especificaciones Aviso de la FCC sobre la interferencia de Radio/TV Garantía Limitada por 1 AñoManuel du propriétaire Table des matières Caractéristiques AccessoiresContenu de l’emballage Vue de face ClavierVue de face suite Configuration suiteDirectives de pré-installation Vue arrièreModule dinterface serveur NetCommander Installation suiteConnexion du système KVM NetCommander Le module dinterface serveur NetCommanderConnexion de lalimentation électrique Réinitialisation du commutateur KVMTempérature ambiante de fonctionnement Montage en bâti du KVM NetCommanderConsidérations sur le montage en bâti Circulation dairCascadage des commutateurs KVM NetCommander Cascadage des commutateurs KVM NetCommanderUtilisation de base UtilisationRaccourcis clavier Navigation dans laffichage à lécran Utilisation suiteAffichage à lécran Selection dun ordinateurParamètres généraux SécuritéChanger le raccourci clavier de laffichage à lécran Changer la langue du clavier Saut automatiquePort série Modification du nom du commutateurModification du nom de lordinateur Paramètres des portsModifier la colonne du clavier Paramètres de la chronologie Fenêtre des paramètres de la chronologieParamètres de sécurité SécuritéParamètres de sécurité Balayage des ordinateurs F4 Fenêtre dAIDE daffichage à lécran F1Paramètres dutilisateur Mise au point F5 Déplacement de létiquette F6Mise à niveau du micrologiciel Exigences système pour la mise à niveau du micrologicielMise à niveau du micrologiciel suite Mise à niveau du micrologiciel suite Mise à niveau du micrologiciel suite Panne délectricité DépannagePanne décran du moniteur Touches combinées USB/SUN Caractéristiques techniques 201002116 932925-FR
Related manuals
Manual 1 pages 43.68 Kb Manual 24 pages 5.57 Kb

B070-016-19, B070-008-19 specifications

The Tripp Lite B070-016-19-IP is a highly versatile 16-port KVM switch that serves as a reliable solution for managing multiple servers or computers from a single set of keyboard, video monitor, and mouse. This device is particularly useful in data centers, server rooms, and other environments where space and efficient management are crucial.

One of the standout features of the B070-016-19-IP is its ability to support remote access. With built-in IP capabilities, administrators can manage connected devices from anywhere in the world, enhancing operational efficiency. This is particularly important in today's increasingly mobile work environments, where remote troubleshooting and management can save time and resources.

The switch supports a variety of video resolutions up to 1920 x 1200, which ensures sharp and clear visual output, making it suitable for high-definition applications. Additionally, it is compatible with all major operating systems, further ensuring versatility in a multi-platform environment. The B070-016-19-IP features a compact design that can be easily integrated into existing systems without requiring significant reconfiguration.

The device employs advanced security measures for remote access, including enhanced encryption to protect sensitive data and server access. This includes features such as user authentication and various access levels, ensuring that only authorized personnel can manage the systems.

Built for durability and reliability, the Tripp Lite B070-016-19-IP is designed with robust construction that can withstand the rigors of daily operation in demanding environments. The device also includes a built-in firmware upgrade capability, keeping it up to date with the latest advancements and features.

In terms of connectivity, the switch offers multiple interfaces, allowing for seamless integration with various hardware configurations. It utilizes standard RJ-45 ports for connection, making installation straightforward and efficient.

Overall, the Tripp Lite B070-016-19-IP KVM switch stands out for its powerful blend of features, flexibility, and security, making it an ideal choice for IT professionals who require efficient management of multiple servers or computers. Whether used in a data center or an office, this KVM switch provides the tools necessary for effective system administration and optimal resource utilization.