Moxa Technologies EDS-408A Configuring Turbo Ring and Turbo Ring, Now Active, Master/Slave

Page 38

EDS-408A/405A Series User’s Manual

Featured Functions

Configuring “Turbo Ring” and “Turbo Ring V2”

Use the Communication Redundancy page to configure select “Turbo Ring” or “Turbo Ring V2.” Note that configuration pages for these two protocols are different.

Configuring “Turbo Ring”

 

Explanation of “Current Status” Items

 

Now Active

 

Shows which communication protocol is in use: Turbo Ring, Turbo Ring V2, RSTP, or none.

 

Master/Slave

 

Indicates whether or not this EDS is the Master of the Turbo Ring. (This field appears only when

 

selected to operate in Turbo Ring or Turbo Ring V2 mode.)

 

 

NOTE

The user does not need to set the master to use Turbo Ring. If no master is set, the Turbo Ring

 

protocol will assign master status to one of the EDS units in the ring. The master is only used to

 

determine which segment serves as the backup path.

 

 

 

Redundant Ports Status (1st Port, 2nd Port)

 

Ring Coupling Ports Status (Coupling Port, Coupling Control Port)

 

The “Ports Status” indicators show Forwarding for normal transmission, Blocking if this port is

 

connected to a backup path and the path is blocked, and Link down if there is no connection.

3-23

Image 38
Contents Moxa EtherDevice Switch EDS-408A/405A Series User’s Manual Fourth Edition, JuneDisclaimer Copyright NoticeTrademarks Table of Contents Appendix a MIB Groups Appendix B Specifications Introduction Inside the Future of Industrial Ethernet Technology Moxa EtherDevice SwitchPackage Checklist Industrial vs. CommercialUseful Utility and Remote Configuration Optional AccessoriesFeatures Advanced Industrial Networking CapabilityGetting Started RS-232 Console Configuration 115200, None, 8, 1, VT100 Connection CautionEDS-408A/405A Series User’s Manual Getting Started Key Function Configuration Using a Telnet Console Configuration Using a Web Browser EDS-408A/405A Series User’s Manual Getting Started Disabling Telnet and Browser Access ConfigurationFeatured Functions Configuring Basic Settings System IdentificationAccount PasswordPassword Allowable Hosts Input format Accessible IPAny host can access the EDS-408A/405A Name EnablePort FDX Flow Control NetworkPort Transmission Speed Port TypeSwitch Subnet Mask Auto IP ConfigurationSwitch IP Address Default GatewayCurrent Time TimeDaylight Saving Time Current DateTurbo Ring DIP Switch Set DIP switch as Turbo Ring / Set DIP switch as Turbo Ring How to Enable or Disable the Turbo Ring DIP SwitchesDisable the Turbo Ring DIP Switch Turbo Ring and Turbo Ring V2 section in this chapter for How to Configure the Turbo Ring DIP SwitchesRedundancy Protocol drop-down box. See the Configuring System File Update-By Remote Tftp System File Update-By Local Import/Export Restart System File Update-By Backup MediaFactory Default Configuring Snmp SnmpV1, V2c Read Community Snmp Read/Write SettingsSnmp Versions V1, V2c Write/Read CommunitySetting Description Factory Default Trap Server IP/Name Setting Description Factory DefaultUsing Communication Redundancy Turbo Ring ConceptInitial setup of a Turbo Ring or Turbo Ring V2 ring Ring Coupling Configuration Determining the Redundant Path of a Turbo Ring V2 RingRing Coupling for a Turbo Ring V2 Ring Dual-Ring Configuration applies only to Turbo Ring Dual-Homing Configuration applies only to Turbo RingNow Active Configuring Turbo Ring and Turbo RingConfiguring Turbo Ring Master/SlaveSet as Master Enable Ring CouplingRedundancy Protocol Redundant PortsRing 1/2-1st Ring Port Status Ring 1/2-StatusRing 1/2-Master/Slave Ring 1/2-2nd Ring Port StatuIndicates either None, Dual Homing, or Ring Coupling Enable RingCoupling-Mode Coupling-Coupling Port statusSTP/RSTP Concept Coupling ModePrimary/Backup Port What is STP? How STP Works STP RequirementsDifferences between Rstp and STP STP ConfigurationSTP Reconfiguration Port Speed Path Cost 802.1D EditionUsing STP on a Network with Multiple VLANs STP ExampleConfiguring STP/RSTP VLAN1Protocol of Redundancy Forwarding DelayRoot/Not Root Bridge priorityConfiguration Limits of RSTP/STP Traffic Prioritization Concept Using Traffic PrioritizationWhat is Traffic Prioritization? How Traffic Prioritization WorksTraffic Prioritization Differentiated Services DiffServ Traffic MarkingIeee 802.1p Priority Level Ieee 802.1D Traffic Type Traffic Queues Queuing Mechanism Configuring Traffic PrioritizationQoS Classification Inspect TOSCoS Mapping Default Port PriorityInspect COS Virtual LAN Vlan Concept Using Virtual LANsWhat is a VLAN? TOS/DiffServ MappingBenefits of VLANs Using Virtual LANsPort-based VLANs and the Moxa EtherDevice Switch Settings-Turbo Ring DIP Switch Policy Using Rate LimitingConfiguring Rate Limiting Using Auto Warning Configuring Email WarningActivate your settings and test email if necessary Email Warning Events SettingsConfiguring Email Settings Event TypesPort Event Email SettingsMoxaEtherDeviceSwitch0001@SwitchLocation Configuring Relay Warning Relay Warning Events Settings Activate your settingsRelay Warning List Using Line-Swap-Fast-RecoveryOverride Relay Warning Settings Enable Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Mirror Port Using DiagnosisConfiguring Set Device IP Desired IP AddressOutput data stream PingInput data stream Bi-directionalMonitor by Port Using the MonitorMonitor by Switch Using the MAC Address Table ALLUsing Event Log Using SyslogSyslog Server EDS Configurator GUI Starting EDS Configurator Broadcast SearchUpgrade Firmware Search by IP addressModify IP Address Export Configuration Import Configuration Unlock Server EDS-408A/405A Series User’s Manual EDS Configurator GUI MIB Groups Interface PowerTechnology Optical FiberRegulatory Approvals MechanicalEnvironment
Related manuals
Manual 86 pages 54.41 Kb

EDS-405A, EDS-408A specifications

Moxa Technologies has established itself as a leader in networking solutions, particularly for industrial applications. Among their cutting-edge products is the 405A Series, specifically the EDS-408A model, which exemplifies Moxa's commitment to performance, reliability, and versatility in industrial Ethernet switches.

The EDS-408A is an 8-port industrial Ethernet switch that offers an impressive array of features and capabilities designed to meet the demands of harsh environments. One of its main highlights is the ability to support both 10/100 Mbps Fast Ethernet and Gigabit Ethernet connections, providing users with the flexibility to integrate a range of devices within their network. Its robust design ensures that it operates seamlessly in extreme conditions, with a wide operating temperature range from -40 to 75 degrees Celsius.

The EDS-408A is built to support an array of networking topologies. It features advanced Ethernet switching technologies that enable fast and efficient data transfer while minimizing latency. The device is equipped with wire-speed forwarding capabilities, which is vital for maintaining high performance in heavy network traffic scenarios.

Another key feature of the EDS-408A is its redundancy support. The switch incorporates various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and MRP (Media Redundancy Protocol), which enhance network reliability by allowing quick recovery in the event of a failure. This ensures continuous network uptime, which is critical for industrial applications.

Furthermore, Moxa Technologies has adopted an user-friendly web-based management interface in the EDS-408A, simplifying the configuration and monitoring process. This allows system administrators to easily manage settings, monitor traffic, and troubleshoot issues in real time. Additionally, the switch supports SNMP (Simple Network Management Protocol) for remote monitoring and management, enabling organizations to keep their networks optimized.

Security is another paramount feature of the EDS-408A. It includes built-in security mechanisms such as port security, VLAN, and access control lists (ACLs), which help safeguard sensitive network segments from unauthorized access.

In conclusion, Moxa Technologies' EDS-408A model from the 405A Series is a robust and feature-rich industrial Ethernet switch designed for demanding environments. With its support for various network protocols, redundancy features, user-friendly management, and enhanced security, the EDS-408A stands out as a reliable solution for organizations looking to enhance their industrial networking capabilities.