Moxa Technologies EDS-405A Coupling-Mode, Indicates either None, Dual Homing, or Ring Coupling

Page 41

EDS-408A/405A Series User’s Manual

Featured Functions

Coupling—Mode

Indicates either None, Dual Homing, or Ring Coupling.

Coupling—Coupling Port status

Indicates either Primary, or Backup.

Explanation of “Settings” Items

Redundancy Protocol

Setting

Description

Factory Default

Turbo Ring

Select this item to change to the

 

Turbo Ring configuration page.

 

 

 

Turbo Ring V2

Select this item to change to the

 

Turbo Ring V2 configuration page.

None

 

RSTP (IEEE

Select this item to change to the

 

802.1W/1D)

RSTP configuration page.

 

None

Ring redundancy is not active

 

Enable Ring 1

 

 

 

 

 

Setting

Description

Factory Default

Enabled

Enable the Ring 1 settings

Not checked

Disabled

Disable the Ring 1 settings

 

Enable Ring 2*

 

 

 

 

 

Setting

Description

Factory Default

Enabled

Enable the Ring 2 settings

Not checked

Disabled

Disable the Ring 2 settings

 

*You should enable both Ring 1 and Ring 2 when using the Dual-Ring architecture.

Set as Master

Setting

Description

Factory Default

Enabled

Select this EDS as Master

Not checked

Disabled

Do not select this EDS as Master

 

Redundant Ports

 

 

 

 

 

Setting

Description

Factory Default

1st Port

Select any port of the EDS to be

EDS-405A: port 4

one of the redundant ports.

EDS-408A: port 7

 

2nd Port

Select any port of the EDS to be

EDS-405A: port 5

one of the redundant ports.

EDS-408A: port 8

 

Enable Ring Coupling

 

 

 

 

 

Setting

Description

Factory Default

Enable

Select this EDS as Coupler

Not checked

Disable

Do not select this EDS as Coupler

 

3-26

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Fourth Edition, June Moxa EtherDevice Switch EDS-408A/405A Series User’s ManualDisclaimer Copyright NoticeTrademarks Table of Contents Appendix a MIB Groups Appendix B Specifications Introduction Package Checklist Moxa EtherDevice SwitchInside the Future of Industrial Ethernet Technology Industrial vs. CommercialFeatures Optional AccessoriesUseful Utility and Remote Configuration Advanced Industrial Networking CapabilityGetting Started Connection Caution RS-232 Console Configuration 115200, None, 8, 1, VT100EDS-408A/405A Series User’s Manual Getting Started Key Function Configuration Using a Telnet Console Configuration Using a Web Browser EDS-408A/405A Series User’s Manual Getting Started Configuration Disabling Telnet and Browser AccessFeatured Functions System Identification Configuring Basic SettingsAccount PasswordPassword Allowable Hosts Input format Accessible IPAny host can access the EDS-408A/405A Name EnablePort Port Transmission Speed NetworkFDX Flow Control Port TypeSwitch IP Address Auto IP ConfigurationSwitch Subnet Mask Default GatewayDaylight Saving Time TimeCurrent Time Current DateTurbo Ring DIP Switch Set DIP switch as Turbo Ring / Set DIP switch as Turbo Ring How to Enable or Disable the Turbo Ring DIP SwitchesDisable the Turbo Ring DIP Switch Turbo Ring and Turbo Ring V2 section in this chapter for How to Configure the Turbo Ring DIP SwitchesRedundancy Protocol drop-down box. See the Configuring System File Update-By Remote Tftp System File Update-By Local Import/Export Restart System File Update-By Backup MediaFactory Default Snmp Configuring SnmpSnmp Versions Snmp Read/Write SettingsV1, V2c Read Community V1, V2c Write/Read CommunityTrap Server IP/Name Setting Description Factory Default Setting Description Factory DefaultTurbo Ring Concept Using Communication RedundancyInitial setup of a Turbo Ring or Turbo Ring V2 ring Determining the Redundant Path of a Turbo Ring V2 Ring Ring Coupling ConfigurationRing Coupling for a Turbo Ring V2 Ring Dual-Homing Configuration applies only to Turbo Ring Dual-Ring Configuration applies only to Turbo RingConfiguring Turbo Ring Configuring Turbo Ring and Turbo RingNow Active Master/SlaveRedundancy Protocol Enable Ring CouplingSet as Master Redundant PortsRing 1/2-Master/Slave Ring 1/2-StatusRing 1/2-1st Ring Port Status Ring 1/2-2nd Ring Port StatuCoupling-Mode Enable RingIndicates either None, Dual Homing, or Ring Coupling Coupling-Coupling Port statusSTP/RSTP Concept Coupling ModePrimary/Backup Port What is STP? STP Requirements How STP WorksSTP Reconfiguration STP ConfigurationDifferences between Rstp and STP Port Speed Path Cost 802.1D EditionSTP Example Using STP on a Network with Multiple VLANsVLAN1 Configuring STP/RSTPRoot/Not Root Forwarding DelayProtocol of Redundancy Bridge priorityConfiguration Limits of RSTP/STP What is Traffic Prioritization? Using Traffic PrioritizationTraffic Prioritization Concept How Traffic Prioritization WorksTraffic Prioritization Differentiated Services DiffServ Traffic MarkingIeee 802.1p Priority Level Ieee 802.1D Traffic Type Traffic Queues QoS Classification Configuring Traffic PrioritizationQueuing Mechanism Inspect TOSCoS Mapping Default Port PriorityInspect COS What is a VLAN? Using Virtual LANsVirtual LAN Vlan Concept TOS/DiffServ MappingBenefits of VLANs Using Virtual LANsPort-based VLANs and the Moxa EtherDevice Switch Settings-Turbo Ring DIP Switch Policy Using Rate LimitingConfiguring Rate Limiting Configuring Email Warning Using Auto WarningConfiguring Email Settings Email Warning Events SettingsActivate your settings and test email if necessary Event TypesPort Event Email SettingsMoxaEtherDeviceSwitch0001@SwitchLocation Configuring Relay Warning Activate your settings Relay Warning Events SettingsRelay Warning List Using Line-Swap-Fast-RecoveryOverride Relay Warning Settings Enable Line-Swap-Fast-Recovery Using Set Device IPConfiguring Line-Swap Fast Recovery Configuring Set Device IP Using DiagnosisMirror Port Desired IP AddressInput data stream PingOutput data stream Bi-directionalMonitor by Port Using the MonitorMonitor by Switch ALL Using the MAC Address TableUsing Syslog Using Event LogSyslog Server EDS Configurator GUI Broadcast Search Starting EDS ConfiguratorSearch by IP address Upgrade FirmwareModify IP Address Export Configuration Import Configuration Unlock Server EDS-408A/405A Series User’s Manual EDS Configurator GUI MIB Groups Technology PowerInterface Optical FiberRegulatory Approvals MechanicalEnvironment
Related manuals
Manual 86 pages 54.41 Kb

EDS-405A, EDS-408A specifications

Moxa Technologies has established itself as a leader in networking solutions, particularly for industrial applications. Among their cutting-edge products is the 405A Series, specifically the EDS-408A model, which exemplifies Moxa's commitment to performance, reliability, and versatility in industrial Ethernet switches.

The EDS-408A is an 8-port industrial Ethernet switch that offers an impressive array of features and capabilities designed to meet the demands of harsh environments. One of its main highlights is the ability to support both 10/100 Mbps Fast Ethernet and Gigabit Ethernet connections, providing users with the flexibility to integrate a range of devices within their network. Its robust design ensures that it operates seamlessly in extreme conditions, with a wide operating temperature range from -40 to 75 degrees Celsius.

The EDS-408A is built to support an array of networking topologies. It features advanced Ethernet switching technologies that enable fast and efficient data transfer while minimizing latency. The device is equipped with wire-speed forwarding capabilities, which is vital for maintaining high performance in heavy network traffic scenarios.

Another key feature of the EDS-408A is its redundancy support. The switch incorporates various redundancy protocols, including Rapid Spanning Tree Protocol (RSTP) and MRP (Media Redundancy Protocol), which enhance network reliability by allowing quick recovery in the event of a failure. This ensures continuous network uptime, which is critical for industrial applications.

Furthermore, Moxa Technologies has adopted an user-friendly web-based management interface in the EDS-408A, simplifying the configuration and monitoring process. This allows system administrators to easily manage settings, monitor traffic, and troubleshoot issues in real time. Additionally, the switch supports SNMP (Simple Network Management Protocol) for remote monitoring and management, enabling organizations to keep their networks optimized.

Security is another paramount feature of the EDS-408A. It includes built-in security mechanisms such as port security, VLAN, and access control lists (ACLs), which help safeguard sensitive network segments from unauthorized access.

In conclusion, Moxa Technologies' EDS-408A model from the 405A Series is a robust and feature-rich industrial Ethernet switch designed for demanding environments. With its support for various network protocols, redundancy features, user-friendly management, and enhanced security, the EDS-408A stands out as a reliable solution for organizations looking to enhance their industrial networking capabilities.
Top Page Image Contents