Moxa Technologies user manual Powering on VPort 2140 Video Server, Modem

Page 22

Before powering on the VPort 2140 Video Server:

1.Connect your cameras’ video outputs to the BNC video inputs.

2.Connect VPort’s COM port with your PC’s COM port.

3.Connect the power adaptor.

Modem

Before powering on the VPort 2140 Video Server:

1.Connect your cameras’ video outputs with the BNC video inputs.

2.Connect VPort’s COM port with your modem’s COM port.

3.Power on the Modem.

4.Connect the power adaptor.

Powering on VPort 2140 Video Server

After all cables are correctly and firmly connected, turn on all peripheral devices, including cameras, sensors, and alarm devices. And then connect the VPort 2140 to the power supply.

After being powered on, the VPort will automatically detect if an external modem is connected to the modem port. As soon as an external modem is detected, the CONNECT LED will blink periodically. If no modem is detected, the VPort will assume that the included null modem cable is connected to perform system configuration. Both CONNECT and SERIAL LEDs will show as “steady on” until the dial-up connection over the null modem is established.

2-8 VPort 2140 User’s Manual

Image 22

Contents VPort User’s Manual First Edition, MarchTrademarks Copyright NoticeDisclaimer Before getting started Table of Contents Chapter Advanced Applications Page Introduction Overview Package Checklist Product FeaturesEthernet Connection Typical ApplicationsModem Dial-up Connection Product Descriptions Front PanelNetwork LEDs ACTIVE, LINK, and FDX Mode ConditionName Description Work Status General I/O terminal block Rear PanelCOM1 & COM Pin description Regulation11 10/100 Mbps Ethernet Input 12 VDCBefore Getting Started Setting up an Ethernet Environment Getting StartedCable Connection Setting up an Ethernet EnvironmentBefore Getting Started Front PanelRunning the IP Installer Program Rear PanelUsing the IP Installer Program Powering on the VPort 2140 Video ServerAssigning an IP Address to VPort 2140 Video Server Getting Started Accessing VPort 2140 Video Server for the First Time Using DOS Commands under WindowsSetting up a Modem Environment Null ModemPowering on VPort 2140 Video Server ModemConfiguring a Modem Under Windows 2000 Environment Installing a new modemVPort 2140 User’s Manual Setting up a new connection Modem Mode Click on Start Control Panel ModemsVPort 2140 User’s Manual Getting Started Mounting VPort Null Modem ModeModem Mode Panel MountingAccessing VPort 2140 Video Server for the First Time Authentication Accessing VPort 2140 Video ServerOpening Your Browser Image Mode and Text Mode Functions Featured on the MainInstalling the Plug-in Application Image ModeVideo Quality Selection Logo and Host NameImage Size Selection Camera View selection System ConfigurationCustom Camera Commands Relay Output ControlPage System Configuration Restore facotry default settings Reset system System Configuration Via Web Access Using Setup WizardHost name Using the Application WizardSystem Surveillance SystemSecurity Root passwordDate and Time Network Snapshot modeReset network at next boot Add userGeneral HttpFTP Save the modificationVideo Image settingColor, Default size, and Default quality Show Time stamp in image and Text on imageMotion Detection Camera SettingPreset position setting of Motorized PTZ camera Camera typeModulation Default Video SourceCOM 1 & COM RS-232 RS-485 SpeedPort Settings Interface modePurpose Custom command ApplicationWeekly schedule LevelTrigger Condition Event operationShow alert in image Trigger ActionView Snapshot Sequential ModeSend Snapshot by Email or FTP SaveHomepage layout DemoLogo graph Logo link Web page display modeView log file Background graphFactory default View parametersSystem Configuration Via FTP Video Server Initial Configuration fileFrom 12 to Lime, 10-aqua, 11-fuchsia, 12-silver Or 1024 to String of max characters Or RS485 Or YES to activate external script System core debugging System Configuration Via TelnetTelnet Commands Monitor changed status of digital inputsRestore factory default settings Skip installation at next bootReset network for new settings Reset systemURL Commands for DI/DO & Camera’s Actions Setting Advanced ApplicationsGetting snapshot via URL Capturing Up-to-date Still ImagesVideo Embedded in Customers’ Homepage Getting snapshot via FTPGetting triggered snapshots via URL File name Pre-alarm Upon alarm Post-alarmDownload Event-triggered Snapshots Getting triggered snapshots via FTPCustomizing Graphics in Homepage Command Script for DI/DO & Camera’s Actions SettingObject File name Maximal size Event Command formatParameter Explanations OperatorCommand line Description Practical ExamplesMoving motorized camera in PTZ direction URL Commands for DI/DO & Camera’s Actions SettingDrive digital outputs Recalling camera positionDownload System Log via FTP URL Commands for System MaintenanceRestore Factory Default Settings via URL Restart System via URLUpgrading System Firmware Using Upgrade Wizard to Upgrade Firmware Easily Using FTP to Upgrade Firmware Page Troubleshooting Frequently Asked Questions Power On Self Test PostLED pattern after Post Failed function Troubleshooting Troubleshooting VPort 2140 User’s Manual URL Commands of Video Server URLResource name Reference URL Name Value DescriptionNetwork Configuration URL Video Configuration URL COM 1 Configuration URL Camera custom command configuration URL Custom camera configuration URL Motion detection configuration URL VPort 2140 User’s Manual A-9 Page Settings of Supported PTZ Cameras Camera model Baud rate Data bits Stop bit Parity bitPage Camera Control Cable Page Time Zone Table VPort 2140 User’s Manual Technical Specifications General I/O Service Information Moxa Internet Services Following services are providedProblem Report Form Moxa Product VPort Serial NumberProduct Return Procedure