Moxa Technologies VPort 2140 Command format, Parameter Explanations, Event, Operator, Action

Advanced Applications

time except for the above schedule.

Step 5: Check the option Enable the external script file to exclude the following settings to activate the command script.

Command format

[Event][“Operator”Event]……=[Action][+Action]……;

Event

[“Digital Input Number””Digital Input State”] [“M” “Channel Number…”]

[“Channel Number””Video Input State”]

Operator

“+”: (OR)

“*”: (AND)

Action

[(“Delay Time”)“Digital Output Number””Digital Output State”] [“V”“Channel Number”“P”“Preset Location Number”] [“W”{“IP”:“Port”}{“Message”}]

[“U”“Method”] [“S”“Channel Number…”]

[“N”{“filename”}];

Parameter Explanations

Items above in brackets show the options available for that item.

“Digital input number”:	1 to 4
“Digital input state”:	H (high), L (low), / (low to high), \ (high to low)
“M”:	motion detection event.
“Channel Number”:	A, B, C, D for channel 1, 2, 3, 4
“Video input state”:	/ (signal from loss to presence), \ (signal from presence to loss), X (as
	long as signal loss)
“Delay time”:	seconds of delay for the following actions after events happen
“Digital output number”:	1 or 2
“Digital output state”:	C (NC), O (NO)
“V”:	set video channel to go to preset location
“P”:	set preset location number to go to preset location
“W”:	send warning to server
“IP”:	server IP
“Port”:	server port
“Message”:	text to be sent to the server
“U”:	upload snapshots
“Method”:	‘F’ is by FTP, ‘M’ is by e-mail
“S”:	take snapshot on channels
“N”:	define the format of the filename
“;”:	end of line
The filename format is,
%a	image characterization (pre, trg, pos)
%c	video channel number
%y	year
%M	month
%d	day
%h	hour
%m	minute

VPort 2140 User’s Manual 5-5