Moxa Technologies VPort 2140 user manual Technical Specifications

Page 95

E

Technical Specifications

System

CPU: Trimedia PNX1300

RAM: 16MB SDRAM

ROM: 2MB FLASH ROM

Networking

Adjustable bandwidth limit

Protocols

TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS and DHCP

Modem

PPP (dial-up, direct cable connection)

Ethernet

10BaseT Ethernet or 100BaseT Fast Ethernet

Video

Algorithms Supported

JPEG, MJPEG

Video Inputs and Outputs

4 BNC video inputs with 75 ohm terminal switch, NTSC/PAL auto-sensing

4 BNC loop-through video outputs

Features

Adjustable image size and quality

B/W or color control

Timestamp and text overlay

Resolution

NTSC

Up to 30 frames at 176x112

Up to 30 frames at 352x240

Up to 9 frames at 704x480 or quad

PAL

Up to 25 frames at 176x144

Up to 25 frames at 352x288

Up to 8 frames at 704x576 or quad

Serial Port

COM1

DB9 RS-232 or RS-485 Terminal block (PTZ camera control) max.115.2Kbps

COM2

DB9 RS-232 (PTZ camera control or modem), max.115.2Kbps

LED Indicators

NETWORK:

ACTIVE, LINK, FDX (full duplex)

SYSTEM:

POWER, CONNECT, SERIAL

Dimensions

193.71 x 195 x 44.3 mm (W x D x H)

Weight

Net. 890g

Power

Consumption: near 7.8W

Input: 100-240VAC, 50/60Hz, 0.4A

Output: 12VDC, 1.5A (12 VDC, 1.25A for UK plug)

External Power Supply

Operating Environment

Operating Temperature: 0 to 65°C/ 32 to 149°F

Storage Temperature: -40 to 70°C/ -14 to 158°F

Humidity: 95%RH

Alarm Features

Motion detection with percentage and sensitivity

Daily repeat timing schedule

3 color images per camera for pre/post alarm Automatic transfer of stored images via email or FTP with event-triggered actions

PAN/TILT/ZOOM

Multiple PTZ camera control through RS-232 or RS-485

Supported devices and protocols:

Sony VISCA protocol, Canon VC-C1, VC-C3, VC-C4, Dynacolor SmartDOME, Pelco D-protocol, Lilin Speeddome, Ernitec Speeddome

CGI command serial driver is supported

Software Development Kit

Open ActiveX control

Viewing System Requirement

Internet Explorer 4.x or above,

Netscape Navigator 4.x or above

Image 95

Contents First Edition, March VPort User’s ManualDisclaimer Copyright NoticeTrademarks Before getting started Table of Contents Chapter Advanced Applications Page Introduction Overview Product Features Package ChecklistModem Dial-up Connection Typical ApplicationsEthernet Connection Front Panel Product DescriptionsName Description Work Status Mode ConditionNetwork LEDs ACTIVE, LINK, and FDX Pin description Regulation Rear PanelCOM1 & COM General I/O terminal blockInput 12 VDC 11 10/100 Mbps EthernetGetting Started Before Getting Started Setting up an Ethernet EnvironmentFront Panel Setting up an Ethernet EnvironmentBefore Getting Started Cable ConnectionRear Panel Running the IP Installer ProgramAssigning an IP Address to VPort 2140 Video Server Powering on the VPort 2140 Video ServerUsing the IP Installer Program Getting Started Using DOS Commands under Windows Accessing VPort 2140 Video Server for the First TimeNull Modem Setting up a Modem EnvironmentModem Powering on VPort 2140 Video ServerInstalling a new modem Configuring a Modem Under Windows 2000 EnvironmentVPort 2140 User’s Manual Modem Mode Click on Start Control Panel Modems Setting up a new connectionVPort 2140 User’s Manual Getting Started Panel Mounting Null Modem ModeModem Mode Mounting VPortAccessing VPort 2140 Video Server for the First Time Opening Your Browser Accessing VPort 2140 Video ServerAuthentication Image Mode Functions Featured on the MainInstalling the Plug-in Application Image Mode and Text ModeImage Size Selection Logo and Host NameVideo Quality Selection Relay Output Control System ConfigurationCustom Camera Commands Camera View selectionPage System Configuration Restore facotry default settings Reset system Using Setup Wizard System Configuration Via Web AccessSurveillance System Using the Application WizardSystem Host nameDate and Time Root passwordSecurity Add user Snapshot modeReset network at next boot NetworkHttp GeneralSave the modification FTPShow Time stamp in image and Text on image Image settingColor, Default size, and Default quality VideoCamera type Camera SettingPreset position setting of Motorized PTZ camera Motion DetectionRS-232 RS-485 Speed Default Video SourceCOM 1 & COM ModulationPurpose Interface modePort Settings Application Custom commandLevel Weekly scheduleTrigger Action Event operationShow alert in image Trigger ConditionSave Sequential ModeSend Snapshot by Email or FTP View SnapshotLogo graph DemoHomepage layout Background graph Web page display modeView log file Logo linkView parameters Factory defaultVideo Server Initial Configuration file System Configuration Via FTPFrom 12 to Lime, 10-aqua, 11-fuchsia, 12-silver Or 1024 to String of max characters Or RS485 Or YES to activate external script Monitor changed status of digital inputs System Configuration Via TelnetTelnet Commands System core debuggingReset system Skip installation at next bootReset network for new settings Restore factory default settingsAdvanced Applications URL Commands for DI/DO & Camera’s Actions SettingGetting snapshot via FTP Capturing Up-to-date Still ImagesVideo Embedded in Customers’ Homepage Getting snapshot via URLGetting triggered snapshots via FTP File name Pre-alarm Upon alarm Post-alarmDownload Event-triggered Snapshots Getting triggered snapshots via URLObject File name Maximal size Command Script for DI/DO & Camera’s Actions SettingCustomizing Graphics in Homepage Operator Command formatParameter Explanations EventPractical Examples Command line DescriptionRecalling camera position URL Commands for DI/DO & Camera’s Actions SettingDrive digital outputs Moving motorized camera in PTZ directionRestart System via URL URL Commands for System MaintenanceRestore Factory Default Settings via URL Download System Log via FTPUpgrading System Firmware Using Upgrade Wizard to Upgrade Firmware Easily Using FTP to Upgrade Firmware Page Troubleshooting LED pattern after Post Failed function Troubleshooting Power On Self Test PostFrequently Asked Questions Troubleshooting VPort 2140 User’s Manual URL URL Commands of Video ServerName Value Description Resource name Reference URLNetwork Configuration URL Video Configuration URL COM 1 Configuration URL Camera custom command configuration URL Custom camera configuration URL Motion detection configuration URL VPort 2140 User’s Manual A-9 Page Camera model Baud rate Data bits Stop bit Parity bit Settings of Supported PTZ CamerasPage Camera Control Cable Page Time Zone Table VPort 2140 User’s Manual Technical Specifications General I/O Service Information Following services are provided Moxa Internet ServicesMoxa Product VPort Serial Number Problem Report FormProduct Return Procedure