Moxa Technologies C104H/PCI Series user manual Software Installation

Software Installation

13.Check Set the change to all ports check-box then if desire to apply Rx FIFO Trigger just defined to all ports.

14.Select a Tx FIFO Size from Tx FIFO Size pull-down list.

Tx FIFO sizes from 1 to 16 bytes are available, and the default value is 16 bytes.

15.Check Set the change to all ports check-box then the if desire to apply Tx FIFO Size just defined to all ports.

16.Click [OK] button in Port X dialog box to confirm the port setting.

17.Click [OK] button in Property dialog box to complete the port setting and return to MOXA Smartio/Industio Configuration Panel dialog box.

Now the configured C104H/PCI Series board item will be shown in MOXA Smartio/Industio Configuration Panel dialog box.

Smartio C104H/PCI Series User’s Manual 3-5