Moxa Technologies C104H/PCI Series user manual Select Ports Configuration tab

Software Installation

Service to provide dial-up networking capabilities.

Configuring Board and Port

If desire to re-configure the COM number for the ports of installed boards and drivers under Windows 95/98, please follow procedures listed below.

Instead of following procedures listed below, it is also allowed to do so by clicking [Start] è [Program Files] è [MOXA Utility] è [MOXA Smartio/Industio Configuration Panel] è [Property] è [Port Setting].

For this is a PCI board, once the board is added or unplugged, the configuration will be automatically added or removed by the system. Thus, it saves your effort to do add or remove action.

1.Open [Control Panel], click [System] icon, select [Device Manager] tab, and then select Moxa Smartio/Industio multiport board.

2.Click on desired C104H/PCI Series board entry, and click [Properties] button.

3.Select [Ports Configuration] tab.

Smartio C104H/PCI Series User’s Manual 3-23