A
| Technical Reference |
Specification |
|
v Bus interface: | |
v Number of ports: | 4 |
v I/O address: | Assigned by PCI BIOS |
v IRQ: | Assigned by PCI BIOS |
v Data bits: | 5, 6, 7, 8 |
v Stop bits: | 1, 1.5, 2 |
v Parity: | None, even, odd, space, mark |
v UART: | 4¡Ñ16C550C or compatible |
v Speed (bps): | 50 ~ 921.6K |
v Connectors: | 4¡ÑDB25 male (Opt4C) or 4¡ÑDB9 male (Opt4D) |
v Data signals: | |
| GND |
v Surge protection: | Max. 2000V (C104HS/PCI) |
v Operating temp: | 0 ~ 55 ¢J |
v Power requirement: | C104H/PCI: 86mA max. (+5V), 210mA max. (+12V), |
| 266mA max.(12V) |
| C104HS/PCI: 110mA max . (+5V), 230mA max . (+12V), |
| 320mA max. (12V) |
v Dimensions: | 120 mm¡Ñ100 mm |
PCI
The
2.1.Hardware configuration for IRQ and I/O addresses is automatically assigned by the PCI BIOS. Hence, you must first plug the board before installing the software driver.
Unlike ISA slots, different PCI slots in the same PC may have different bus numbers and device numbers with respect to the PCI specifications. The same PCI
Smartio C104H/PCI Series User’s Manual