Introduction, Configuration Settings

Appendix A

Fast!UTIL

NOTE: The Fast!UTIL BIOS utility does not run on SunSPARC systems. Refer to the Software Installation Guide for the QLA2300 Board Family (FC2253301) for information regarding adapter configuration settings and for installing FCode on a QLA23xx board in a SunSPARC system.

A.1

Introduction

This appendix provides detailed configuration information for advanced users who want to customize the configuration of the QLA23xx board and the connected devices.

The QLA23xx board can be configured using Fast!UTIL, QLogic’s BIOS-resident configuration tool. Access Fast!UTIL by pressing ALT+Q during the QLA23xx board BIOS initialization (it may take a few seconds for the Fast!UTIL Options menu to display). If you have more than one QLA23xx board, Fast!UTIL asks you to select the QLA23xx board you want to configure. After changing the settings and exiting the utility, Fast!UTIL reboots your system to load the new parameters.

CAUTION! If the configuration settings are incorrect, your QLA23xx board may not function properly.

The following sections describe the Fast!UTIL options.

A.2

Configuration Settings

The first selection on the Fast!UTIL Options menu is Configuration Settings. These settings configure the FC devices and the QLA23xx board to which they are attached.

FC2251101-00 D

A-1