Q-Logic IB0056101-00 G Libibverbs-2.2-xxx.111.yyy.x8664.rpm, Librdmacm-2.2-xxx.106.yyy.x8664.rpm

Page 100

C – RPM Descriptions OpenFabrics RPMs

S

Table C-6. OpenFabrics/RPMs (Continued)

RPM Name

Comments

 

 

libibverbs-2.2-xxx.1_1_1.yyy.x86_64.rpm

Required for

Library that allows userspace processes to use InfiniBand verbs as

OpenFabrics

 

described in the InfiniBand Architecture Specification. This library

 

includes direct hardware access for fast path operations. For this

 

library to be useful, a device-specific plug-in module must also be

 

installed.

 

 

 

libibverbs-utils-2.2-xxx.1_1_1.yyy.x86_64.rpm

Required for

Useful libibverbs example programs such as ibv_devinfo, which

OpenFabrics

 

displays information about IB devices

 

 

 

libipathverbs-2.2-xxx.1_1.yyy.x86_64.rpm

Required for

Provides device-specific userspace driver for QLogic HCAs

OpenFabrics

 

 

 

librdmacm-2.2-xxx.1_0_6.yyy.x86_64.rpm

Optional for

Support for the new connection manager

OpenFabrics

 

 

 

librdmacm-utils-2.2-xxx.1_0_6.yyy.x86_64.rpm

Optional for

Utilities for the new connection manager

OpenFabrics

 

 

 

libsdp-2.2-xxx.1_1_99.yyy.x86_64.rpm

Required for

Can be LD_PRELOAD-ed to have a sockets application use IB Sock-

OpenFabrics

 

ets Direct Protocol (SDP) instead of TCP, transparently and without

 

recompiling the application

 

 

 

ofed-scripts-2.2-xxx.1_3.yyy.x86_64.rpm

Optional for

OpenFabrics scripts

OpenFabrics

 

 

 

openib-diags-2.2-xxx.1_2_7.yyy.x86_64.rpm

Optional for

Useful programs for troubleshooting and checking the state of the

OpenFabrics

 

adapter, IB fabric, and its components

 

 

 

open-iscsi-2.2-xxx.2_0.yyy.x86_64.rpm a

Optional for

Transport independent, multi-platform implementation of RFC3720

OpenFabrics

 

iSCSI with iSER support

 

For SLES systems

 

 

 

opensm-libs-2.2-xxx.3_1_10.yyy.x86_64.rpm

Required for

Provides the library for OpenSM

OpenSM

 

 

 

perftest-2.2-xxx.1_2.yyy.x86_64.rpm

Optional for

IB performance tests

OpenFabrics

 

 

 

C-6

IB0056101-00 G

Image 100
Contents QLogic HCA and InfiniPath→ Software Install Guide QLogic HCA and InfiniPath→ Software Install Guide Version Document Revision HistoryTable of Contents Software Installation Installation Troubleshooting Configuration Files RPM Descriptions List of Figures Page Who Should Read this Guide How this Guide is OrganizedOverview Interoperability Conventions Used in this GuideTypographical Conventions Convention MeaningDocumentation Contact Information Support HeadquartersIntroduction Contact Information IB0056101-00 G QLogic Adapter Model Numbers What’s New in this ReleaseDescription New Features QLogic Model DescriptionInfiniPath/OpenFabrics Supported Distributions Kernels Supported Distributions and KernelsDistribution InfiniPath/OpenFabrics Supported Software Components Compiler SupportDistribution InfiniPath/OpenFabrics Supported Kernels „ Ofed SRP Feature Overview Software Components Step-by-Step Installation Checklist Hardware InstallationSoftware Installation Installing Software Using Rocks onStep-by-Step Installation Checklist Software Installation Page Hardware Installation Requirements HardwareAdapter Models and Related Platforms QLogic Platform Plugs IntoForm Factors QLogic InfiniBand Cables Cabling and SwitchesProduct Number Description Configuring the Bios Optical Fibre OptionSafety with Electricity Verify the Package ContentsList of the Package Contents Unpacking InformationHardware Installation Unpacking Information QLogic QLE7280 with IBA7220 Asic Unpacking the QLogic Adapter AsicDual Adapter Installation Installation StepsPCIe Slot in a Typical Motherboard QLogic PCIe HCA Assembly with Riser Card Hardware Installation for QHT7140 with HTX Riser Assembled PCIe HCA with RiserHTX Slot QLogic QHT7140 Adapter with Riser Card Assembled QHT7140 with Riser Hardware Installation for the QHT7140 Without an HTX Riser Switch Configuration and Monitoring Cabling the Adapter to the InfiniBand SwitchCompleting the Installation Cluster Setup Types of Nodes in a Cluster EnvironmentSupported Linux Distributions Setting Up Your EnvironmentInfiniPath/OpenFabrics Supported Distributions and Kernels Available Packages Choosing the Appropriate Download FilesPackage Description Comments Unpacking the InfiniPath tar File Check for Missing Files or RPMs Libibverbs-2.2-xxx.11.yyy.x8664.rpmInstalling the InfiniPath and OpenFabrics RPMs Distribution Used OnRhel4 Sles10Rpms to Install Choosing the RPMs to InstallIf you want to Then install Using rpm to Install InfiniPath and OpenFabrics PreparingInstalled Layout Starting the InfiniPath Service Configuring the InfiniPath Drivers InfiniPath and OpenFabrics Driver OverviewConfiguring the ipathether Network Interface Configuring the ibipath DriverIpathether Configuration on Red Hat Etc/sysconfig/network-scripts/ifcfg-eth2 # QLogic Interconnect Ethernet DEVICE=eth2 BOOTPROTO=staticIpathether Configuration on Sles 00117504e011Etc/sysconfig/hardware/hwcfg-eth-id-$MAC Etc/sysconfig/network/ifcfg-eth2Etc/udev/rules.d/30-netpersistentnames.rules MODULE=ipathether STARTMODE=autoOpenFabrics Drivers and Services Configuration and Startup Configuring the IPoIB Network Interface Output from this command will be similar to thisEtc/sysconfig/infinipath. Change this line to Configuring and Administering the Vnic Interface00066a0130000001 Service 1 1000066a00000101 InfiniNIC.InfiniConSys.Data01 Etc/infiniband/qlgcvnic.cfgNAME=eioc1 IOCGUID=0x66A0137FFFFE7 # HEARTBEAT=100This example uses DGID, Iocguid and Iocstring # /etc/init.d/infinipath start # /etc/init.d/qlgcvnic start # /etc/init.d/qlgcvnic stop# ibqlgcvnicinfo OpenSMEtc/init.d/opensmd Using Ofed SRP 21000001ff040bf6# ibsrpdm -c # mkdir /mnt/targetname # mount /dev/sde1 /mnt/targetnameStarting and Stopping the InfiniPath Software Other Configuration Changing the MTU SizeMPI over uDAPL To check the configuration state, use the command Rebuilding or Reinstalling Drivers After a Kernel Upgrade Further Information on Configuring and Loading Drivers LED Link and Data IndicatorsLED Link and Data Indicators LED States IndicationAdapter Settings OffCustomer Acceptance Utility Hostname1 Hostname2Command Meaning Ipathcheckout OptionsAdditional Installation Instructions Uninstalling InfiniPath and OpenFabrics RPMsUninstalling Ofed 1.3 Software Removing Software PackagesInstalling Lustre Installing QLogic MPI in an Alternate LocationInstalling on an Unsupported Distribution /etc/redhat-release file or the /etc/SuSE-release fileManaging and Installing Software Using Rocks Usr/src/infinipath/drivers/build-guards.shInstalling Rocks and InfiniPath RPMs Use the following contents Software Installation Additional Installation Instructions Home/install/contrib/4.2.1/x8664/RPMS Further Information on Rocks and kickstart Page Hardware Issues Bios SettingsNode Spontaneously Reboots Some HTX Motherboards May Need Two or More CPUs in UseMtrr Mapping and Write Combining Edit Bios Settings to Fix Mtrr IssuesMtrr Mapping Discrete Issue with Supermicro H8DCE-HTe and QHT7040 Software Installation IssuesUse the ipathmtrr Script to Fix Mtrr Issues Version Number Conflict with opensm-*on RHEL5 Systems OpenFabrics DependenciesOpenFabrics Library Dependencies Rpm no packages given for eraseMissing Kernel RPM Errors Resolving Conflicts Mpirun Installation Requires 32-bit SupportLibgcc-3.4.3-9.EL4.i386.rpm Lockable Memory Error on Initial Installation of InfiniPath Ifup on ipathether on Sles 10 Reports unknown deviceGlibc-2.3.4-2.i686.rpm or glibc-2.3.4-2.i386.rpm Eth3 device QLogic Corp Unknown device 0010 revPage Table B-1. Configuration Files Configuration File Name DescriptionSample and Template Files Description InfiniPath and OpenFabrics RPMs Different Nodes May Use Different RPMsRPM Version Numbers and Identifiers Infinipath-2.2-33597.832rhel4qlc.x8664.rpmRPM Organization Documentation and InfiniPath RPMsTable C-1. InfiniPath Documentation/RPMs RPM Name Front End Compute DevelopmentTable C-3. InfiniPath-Devel/RPMs Table C-2. InfiniPath/RPMsContains ipathcheckout Ipathbug-helpera OpenFabrics RPMs Table C-4. InfiniPath-MPI/RPMsTable C-5. OpenFabrics Documentation/RPMs RPM Name CommentsDapl-utils-2.2-xxx.207.yyy.x8664.rpm Ib-bonding-2.2-xxx.090.yyy.x8664.rpmIbsim-2.2-xxx.04.yyy.x8664.rpm Ibutils-2.2-xxx.12.yyy.x8664.rpmLibibverbs-2.2-xxx.111.yyy.x8664.rpm Libibverbs-utils-2.2-xxx.111.yyy.x8664.rpmLibipathverbs-2.2-xxx.11.yyy.x8664.rpm Librdmacm-2.2-xxx.106.yyy.x8664.rpmTable C-7. OpenFabrics-Devel/RPMs Table C-8. OpenSM/RPMs Table C-9. Other HCAs/RPMsTable C-10. Other HCAs-Devel/RPMs Table C-11. OtherMPIs/RPMsRPM Name Front Comput EndRPM Name Front Comput Developme End Openmpiintel-2.2-xxx.125.yyy.x8 Openmpipathscale-2.2-xxx.125.yyOpenmpipgi-2.2-xxx.125.yyy.x86 Qlogic-mpi-regisRPM Descriptions OpenFabrics RPMs IB0056101-00 G Index Help Openssh Openssh-server 5-3 Optical media converters No packages given for erase warning message A-4 Verbose Page Page Camberley Surrey, GU16 7ER UK +44 0 1276 804