Q-Logic IB0056101-00 G manual Table B-1. Configuration Files, Configuration File Name Description

B Configuration Files

Table B-1contains descriptions of the configuration and configuration template files used by the InfiniPath and OpenFabrics software.

Table B-1. Configuration Files

Configuration File Name	Description
/etc/infiniband/qlogic_vnic.cfg	VirtualNIC configuration file
/etc/modprobe.conf	Specifies options for modules when added
	or removed by the modprobe command.
	Also used for creating aliases.
	For Red Hat systems
/etc/modprobe.conf.local	Specifies options for modules when added
	or removed by the modprobe command.
	Also used for creating aliases.
	For SLES systems
/etc/sysconfig/hardware/hwcfg-	Network module file for ipath_ether
eth-id-$MAC	network interface on SLES systems. $MAC
	is replaced by the MAC address.
/etc/sysconfig/ics_inic.cfg	File where VNIC Ethernet interfaces are
	defined
/etc/sysconfig/infinipath	The primary configuration file for Infini-
	Path, OFED modules, and other modules
	and associated daemons. Automatically
	loads additional modules or changes IPoIB
	transport type.
/etc/sysconfig/network/ifcfg-	Network configuration file for network inter-
<NAME>	faces. When used for ipath_ether,
	<NAME> is in the form ethX, where X is
	the number of the device, typically, 2, 3,
	etc.
	If used for VNIC configuration, name is in
	the form eiocX, where X is the number
	of the device. There will be one interface
	configuration file for each interface defined
	in /etc/sysconfig/ics_inic.cfg.
	For SLES systems

IB0056101-00 G B-1