Q-Logic IB0056101-00 G manual Hardware Installation Unpacking Information

Page 30

4 – Hardware Installation Unpacking Information

S

The package contents for the QLE7280 adapter are:

„QLogic QLE7280

„Additional short bracket

„Quick Start Guide

Standard PCIe risers can be used, typically supplied by your system or motherboard vendor.

The package contents for the QLE7140 adapter are:

„QLogic QLE7140

„Quick Start Guide

Standard PCIe risers can be used, typically supplied by your system or motherboard vendor. The contents are illustrated in Figure 4-2.

The package contents for the QHT7140 adapter are:

„QLogic QHT7140

„HTX riser card for use in 1U or 2U chassis

„Quick Start Guide

The contents are illustrated in Figure 4-3.

The IBA6120, IBA6110, and IBA7220 are the QLogic ASICs, which are the central components of the interconnect. The location of the IBA7220 ASIC on the adapter is shown in Figure 4-1. The location of the IBA6120 ASIC on the adapter is shown in Figure 4-2. The location of the IBA6110 ASIC on the adapter is shown in Figure 4-3.

4-6

IB0056101-00 G

Image 30
Contents QLogic HCA and InfiniPath→ Software Install Guide QLogic HCA and InfiniPath→ Software Install Guide Version Document Revision HistoryTable of Contents Software Installation Installation Troubleshooting Configuration Files RPM Descriptions List of Figures Page Who Should Read this Guide How this Guide is OrganizedOverview Typographical Conventions InteroperabilityConventions Used in this Guide Convention MeaningDocumentation Contact Information Support HeadquartersIntroduction Contact Information IB0056101-00 G What’s New in this Release QLogic Adapter Model NumbersDescription New Features QLogic Model DescriptionSupported Distributions and Kernels InfiniPath/OpenFabrics Supported Distributions KernelsDistribution InfiniPath/OpenFabrics Supported Compiler Support Software ComponentsDistribution InfiniPath/OpenFabrics Supported Kernels „ Ofed SRP Feature Overview Software Components Step-by-Step Installation Checklist Hardware InstallationSoftware Installation Installing Software Using Rocks onStep-by-Step Installation Checklist Software Installation Page Adapter Models and Related Platforms Hardware Installation RequirementsHardware QLogic Platform Plugs IntoForm Factors Cabling and Switches QLogic InfiniBand CablesProduct Number Description Configuring the Bios Optical Fibre OptionList of the Package Contents Safety with ElectricityVerify the Package Contents Unpacking InformationHardware Installation Unpacking Information QLogic QLE7280 with IBA7220 Asic Unpacking the QLogic Adapter AsicDual Adapter Installation Installation StepsPCIe Slot in a Typical Motherboard QLogic PCIe HCA Assembly with Riser Card Hardware Installation for QHT7140 with HTX Riser Assembled PCIe HCA with RiserHTX Slot QLogic QHT7140 Adapter with Riser Card Assembled QHT7140 with Riser Hardware Installation for the QHT7140 Without an HTX Riser Switch Configuration and Monitoring Cabling the Adapter to the InfiniBand SwitchCompleting the Installation Cluster Setup Types of Nodes in a Cluster EnvironmentSetting Up Your Environment Supported Linux DistributionsInfiniPath/OpenFabrics Supported Distributions and Kernels Choosing the Appropriate Download Files Available PackagesPackage Description Comments Unpacking the InfiniPath tar File Check for Missing Files or RPMs Libibverbs-2.2-xxx.11.yyy.x8664.rpmRhel4 Installing the InfiniPath and OpenFabrics RPMsDistribution Used On Sles10Choosing the RPMs to Install Rpms to InstallIf you want to Then install Using rpm to Install InfiniPath and OpenFabrics PreparingInstalled Layout Starting the InfiniPath Service Configuring the InfiniPath Drivers InfiniPath and OpenFabrics Driver OverviewConfiguring the ibipath Driver Configuring the ipathether Network InterfaceIpathether Configuration on Red Hat Etc/sysconfig/network-scripts/ifcfg-eth2 # QLogic Interconnect Ethernet DEVICE=eth2 BOOTPROTO=staticIpathether Configuration on Sles 00117504e011Etc/udev/rules.d/30-netpersistentnames.rules Etc/sysconfig/hardware/hwcfg-eth-id-$MACEtc/sysconfig/network/ifcfg-eth2 MODULE=ipathether STARTMODE=autoOpenFabrics Drivers and Services Configuration and Startup Configuring the IPoIB Network Interface Output from this command will be similar to thisConfiguring and Administering the Vnic Interface Etc/sysconfig/infinipath. Change this line to00066a0130000001 Service 1 1000066a00000101 InfiniNIC.InfiniConSys.Data01 Etc/infiniband/qlgcvnic.cfgNAME=eioc1 IOCGUID=0x66A0137FFFFE7 # HEARTBEAT=100This example uses DGID, Iocguid and Iocstring # /etc/init.d/infinipath start # /etc/init.d/qlgcvnic start # /etc/init.d/qlgcvnic stopOpenSM # ibqlgcvnicinfoEtc/init.d/opensmd Using Ofed SRP 21000001ff040bf6# ibsrpdm -c # mkdir /mnt/targetname # mount /dev/sde1 /mnt/targetnameOther Configuration Changing the MTU Size Starting and Stopping the InfiniPath SoftwareMPI over uDAPL To check the configuration state, use the command Rebuilding or Reinstalling Drivers After a Kernel Upgrade LED Link and Data Indicators Further Information on Configuring and Loading DriversLED Link and Data Indicators LED States IndicationAdapter Settings OffCustomer Acceptance Utility Hostname1 Hostname2Command Meaning Ipathcheckout OptionsUninstalling Ofed 1.3 Software Additional Installation InstructionsUninstalling InfiniPath and OpenFabrics RPMs Removing Software PackagesInstalling Lustre Installing QLogic MPI in an Alternate LocationInstalling on an Unsupported Distribution /etc/redhat-release file or the /etc/SuSE-release fileManaging and Installing Software Using Rocks Usr/src/infinipath/drivers/build-guards.shInstalling Rocks and InfiniPath RPMs Use the following contents Software Installation Additional Installation Instructions Home/install/contrib/4.2.1/x8664/RPMS Further Information on Rocks and kickstart Page Node Spontaneously Reboots Hardware IssuesBios Settings Some HTX Motherboards May Need Two or More CPUs in UseEdit Bios Settings to Fix Mtrr Issues Mtrr Mapping and Write CombiningMtrr Mapping Discrete Software Installation Issues Issue with Supermicro H8DCE-HTe and QHT7040Use the ipathmtrr Script to Fix Mtrr Issues OpenFabrics Library Dependencies Version Number Conflict with opensm-*on RHEL5 SystemsOpenFabrics Dependencies Rpm no packages given for eraseMissing Kernel RPM Errors Mpirun Installation Requires 32-bit Support Resolving ConflictsLibgcc-3.4.3-9.EL4.i386.rpm Glibc-2.3.4-2.i686.rpm or glibc-2.3.4-2.i386.rpm Lockable Memory Error on Initial Installation of InfiniPathIfup on ipathether on Sles 10 Reports unknown device Eth3 device QLogic Corp Unknown device 0010 revPage Table B-1. Configuration Files Configuration File Name DescriptionSample and Template Files Description RPM Version Numbers and Identifiers InfiniPath and OpenFabrics RPMsDifferent Nodes May Use Different RPMs Infinipath-2.2-33597.832rhel4qlc.x8664.rpmTable C-1. InfiniPath Documentation/RPMs RPM OrganizationDocumentation and InfiniPath RPMs RPM Name Front End Compute DevelopmentTable C-2. InfiniPath/RPMs Table C-3. InfiniPath-Devel/RPMsContains ipathcheckout Ipathbug-helpera Table C-5. OpenFabrics Documentation/RPMs OpenFabrics RPMsTable C-4. InfiniPath-MPI/RPMs RPM Name CommentsIbsim-2.2-xxx.04.yyy.x8664.rpm Dapl-utils-2.2-xxx.207.yyy.x8664.rpmIb-bonding-2.2-xxx.090.yyy.x8664.rpm Ibutils-2.2-xxx.12.yyy.x8664.rpmLibipathverbs-2.2-xxx.11.yyy.x8664.rpm Libibverbs-2.2-xxx.111.yyy.x8664.rpmLibibverbs-utils-2.2-xxx.111.yyy.x8664.rpm Librdmacm-2.2-xxx.106.yyy.x8664.rpmTable C-7. OpenFabrics-Devel/RPMs Table C-8. OpenSM/RPMs Table C-9. Other HCAs/RPMsRPM Name Front Comput Table C-10. Other HCAs-Devel/RPMsTable C-11. OtherMPIs/RPMs EndRPM Name Front Comput Developme End Openmpipgi-2.2-xxx.125.yyy.x86 Openmpiintel-2.2-xxx.125.yyy.x8Openmpipathscale-2.2-xxx.125.yy Qlogic-mpi-regisRPM Descriptions OpenFabrics RPMs IB0056101-00 G Index Help Openssh Openssh-server 5-3 Optical media converters No packages given for erase warning message A-4 Verbose Page Page Camberley Surrey, GU16 7ER UK +44 0 1276 804