Q-Logic IB0056101-00 G manual Home/install/contrib/4.2.1/x8664/RPMS

5 – Software Installation Additional Installation Instructions

S

mode="create" perms="a+rx"> #!/bin/sh

cd /home/install/contrib/4.2.1/x86_64/RPMS

rpm -Uvh --force infinipath*.rpm ‘ls mpi*rpm grep -v openmpi‘

#If and Only IF OpenSM is needed and then please enable OpenSM

#only on one node.

rpm -Uvh --force opensm-2.2-*_qlc.x86_64.rpm \ libibcommon-2.2-*_qlc.x86_64.rpm \ libibmad-2.2-*_qlc.x86_64.rpm \ libibumad-2.2-*_qlc.x86_64.rpm \ opensm-devel-2.2-*_qlc.x86_64.rpm \ opensm-libs-2.2-*_qlc.x86_64.rpm

#Install any other OpenFabrics (OFED) packages that you want,

#then restart

/etc/init.d/infinipath restart #Either move this file or remove it

mv /etc/rc.d/rocksconfig.d/post-97-infinipath /tmp #rm /etc/rc.d/rocksconfig.d/post-97-infinipath </file>

</post>

</kickstart>

In this file, the installation of the InfiniPath drivers is done in the <post> section, as it is a live install. This file can be used as a guideline: it may be cut and pasted, then modified to suit your needs.

5.On the front end node, download the InfiniPath 2.2 tarball for your distribution, RHEL4 or SLES10.

After downloading the tarball, type the following, where xxx is the distribution identifier, and yyy is the platform architecture:

$ tar zxvf InfiniPath2.2-xxx-yyy.tgz

The tar command will create a directory based on the tar file name and place the RPMs there. Next, copy the RPMs you want to install to the directory:

/home/install/contrib/4.2.1/x86_64/RPMS

It is easiest to copy all of the RPMs to this directory, then use the commands in the extend-compute.xmlfile to install the desired packages.

5-40 IB0056101-00 G