Wall Mount
For many industrial applications, you will find it convenient to mount NPort 6110 on the wall, using two screws, as indicated below.
STEP 1: Screw two screws, separated by 7.8 cm, into the wall. The heads of the screws should be no greater than 6.5 mm in diameter, and the shafts should be no greater than 3 mm in diameter. Do not screw the screws in all the
6.5 mm
|
| 7.8 cm |
|
STEP 2: Insert the two screw heads | STEP 3: For added stability, tighten | ||
through the large parts of the | the two screws. | ||
keyhole shaped apertures, and |
|
| |
then slide NPort 6110 |
|
| |
downwards, as indicated. |
|
| |
RESET | 10/100M |
|
|
Ethernet |
|
| |
PWR |
| RESET | 10/100M |
Link |
| Ethernet | |
|
|
| |
Ready |
| PWR |
|
|
|
| |
|
| Link |
|
|
| Ready |
|
| 6110 |
|
|
Modbus/TCP to Serial |
|
| |
Communication Gateway |
|
| |
|
|
| 6110 |
|
| Modbus/TCP to Serial | |
|
| Communication Gateway | |
|
|
| |
|
|
| |
To remove NPort Express from the wall mount, simply reverse Steps 2 and 3.