Moxa Technologies 6110 user manual RTS/CTS Uart Fifo

Page 39

Modbus Serial Settings

	Setting	Value	Notes
		RS-232	NPort 6110 supports
	Interface Mode
		RS-422
		RS-422	2-wire RS-485 mode.
			2-wire RS-485 mode.
		RS-485

	Baud Rate	1200 bps to 230400 bps
	Parity	None, Odd, Even,
	Parity	Space, Mark
		Space, Mark
	Data Bits	7, 8
	Stop Bit	1, 2
	Flow Control	None, Xon/Xoff,
	Flow Control	RTS/CTS
		RTS/CTS
	UART FIFO	Enable, Disable

4-13

Image 39

Contents NPort 6110 Modbus/TCP To Serial Communication Gateway Page NPort 6110 Modbus/TCP To Serial Communication Gateway Page Moxa Internet Services Page Table of Contents Page Overview IntroductionPowerful operation modes for versatile Modbus applications FeaturesLAN Product SpecificationsEnvironmental Package ChecklistFront/Top/Rear/Bottom Panel Views Page Power Connection Serial InstallationGetting Started Software Installation Ethernet InstallationPage Page Page Page DIN-Rail HousingWall Mount Typical Modbus Applications Connect all Modbus devices over the Ethernet network… Link the Serial Master device with Ethernet Slave devices… Page Configuring Modbus Gateway Starting Modbus Gateway Configurator Searching for NPort Broadcast SearchSpecify by IP Address Modify Configuration Network Settings Alphanumeric Modbus SettingsPage Page Advanced Modbus Settings IP address Page Modbus Serial Settings RTS/CTS Uart Fifo Password Upgrade Firmware Other FunctionsUnlock Page Start Log Monitor Remote Monitoring and ManagementPage ID No. mismatch TroubleshootingPage DB9 Male Pinouts Pin AssignmentsPage Declaration of Conformity Page NPort 6110 Modbus Gateway Problem Report FormReturn Procedure