Schneider Electric SURTD 3000 manual

Page 14

Press 2 and ENTER to change the Battery Settings.

Type in the number of external battery packs (four battery modules per pack), and press ENTER.

(Number of packs: 1 = 1 SURT192XLBP, 2 = 2 SURT192XLBP etc.)

Press 3 and ENTER to accept the changes.

Press ESC multiple times (5) to return to the main menu.

Press 4 and ENTER to log out.

5.For Windows users: START the PowerChute® Server using the following steps:

From the Desktop, go to Start => Settings => Control Panel => Administrative Tools => Services.

Select APC PowerChute Server – right click the mouse and select Start.

5a. For Linux users: START the PowerChute Server using the following steps:

Change directory to /etc/init.d.

Initiate the command ./PowerChute start.

14

Image 14
Contents Smart-UPSRT Introduction SpecificationsInstallation UnpackingWiring and Connecting the UPS Connecting the Battery Modules and Attaching the Front Bezel Normal bypass Avoid using extension cords Troubleshooting in this manual OperationDoes not affect the voltage display User Configurable Items ON, OFFXLJ models Connecting the EPO Emergency Power OFF Option Terminal Mode to Configure UPS Parameters VA models Page Replacing the Battery Module Maintenance and TransportDisconnecting the Battery for Transport TROUBLESHOOTING, SERVICE, and Warranty Information Bypass LED Illuminates Service Limited WarrantyAPC Worldwide Customer Support Radio Frequency Warnings