Schneider Electric SURTD 3000 manual Replacing the Battery Module, Maintenance and Transport

Page 15

MAINTENANCE AND TRANSPORT

Replacing the Battery Module

This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on during the procedure. See your dealer or contact APC at the Web site, www.apc.com for information on replacement battery modules.

The battery replacement procedure must include replacing all battery modules in the UPS and connected external battery pack(s).

Once the battery(s) are disconnected, the connected equipment is not protected from power outages.

Be careful during battery replacement, the battery modules are heavy.

Be sure to deliver spent batteries to a recycling facility or ship to the manufacturer in the replacement battery packing material.

REMOVING BATTERY MODULES

X YZ

[\

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Smart-UPSRT Unpacking SpecificationsInstallation IntroductionWiring and Connecting the UPS Connecting the Battery Modules and Attaching the Front Bezel Normal bypass Avoid using extension cords Operation Troubleshooting in this manualDoes not affect the voltage display ON, OFF User Configurable ItemsXLJ models Connecting the EPO Emergency Power OFF Option Terminal Mode to Configure UPS Parameters VA models Page Maintenance and Transport Replacing the Battery ModuleDisconnecting the Battery for Transport TROUBLESHOOTING, SERVICE, and Warranty Information Bypass LED Illuminates Limited Warranty ServiceRadio Frequency Warnings APC Worldwide Customer Support
Top Page Image Contents