PowerLogicTM E4800 Series | |
PowerLogic E4800 configuration tool guide | 02/2009 |
|
|
6.To select the meter that you wish to program from the list, click the Load Unit Configuration check box, then click Ok. As shown in Figure 5, the configuration tool main window appears populated with the current programming information for the meter selected. Table 2 describes the programming information in each field of the main window.
NOTE: Only meters that are on the network segment as the PC will be discovered by the configuration tool.
Figure 5: Main configuration window with configured parameters
10 | © 2009 Schneider Electric All Rights Reserved |