PowerLogicTM E4800 Series | |
PowerLogic E4800 configuration tool guide | 02/2009 |
|
|
Report Parameters
The Report section in the main configuration window has three tabs:
•the Period tab allows the user to configure when the reports are generated and the interval at which data is collected. Figure 6 shows the Period tab, and Table 3 lists configuration parameters within the tab.
•the Types tab allows the user to configure the types of reports that are generated, and to define the metering parameters that are to be logged on an interval basis. Figure 7 shows the Types tab, and Table 4 lists the configuration parameters within the tab.
•the Real Time Interval tab allows the user to configure real time reporting daily, or at a specified regular interval in minutes. It allows the user to define how often the meter is to send interval data to a server. This setting works independenly from the Period tab setting. Figure 8 shows the Real Time Interval tab, and Table 5 lists the configuration parameters within the tab.
12 | © 2009 Schneider Electric All Rights Reserved |