Pelco EW5001 manual Wire Color, Ac+

Page 14

To install the power cable (refer to Figure 6 on page 13):

1.Run power lines from the power supply to the mount site (refer to the power specifications at the start of this section).

2.Connect the power lines from the power supply to the supplied power cable, as indicated:

Wire Color

DC

AC

 

 

 

White

DC+

AC+

 

 

 

Black

Ground

AC-

 

 

 

NOTES:

•Be sure to use environmentally-rated connectors when connecting power to the EW5001. Otherwise, unit reliability may suffer.

•The supplied power cable may include other leads that are not used.

•If the supplied power cable cannot reach from the power source to the mount site, attach additional power cable. Make sure the cable is rated for outdoor use.

•If you use a junction box or patch panel, make sure the connection is protected from the weather.

•Installers should consult local, state, and federal code requirements before installing this cable or running this cable inside any building. Installers should also use best practices when terminating this or any other cable lead.

3.Run the other end of the supplied power cable to the mount site.

You will connect the power cable to the EW5001 later (refer to Unit Installation on page 19).

Network Cable

The EW5001 requires a network cable that meets the following specifications:

•Weatherproof

•Silicon filled

•Cat5e or greater unshielded twisted pair (UTP)

•Long enough to reach the EW5001 from the network switch, up to 328 ft (100 m)

Refer to Optional Accessories on page 5 for a list of approved cables of various lengths that can be purchased from Pelco.

14

C2681M (2/08)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Endura EW5001 Wireless Access Point/Bridge Contents List of Illustrations List of TablesExposure to Radio Frequency Fields Regulatory NoticesVideo Quality Caution Models Optional AccessoriesDescription USER-SUPPLIED Parts Parts ListBefore You Begin Qty DescriptionPackage Contents Sample EW5001 Access Point Application Scenario Application ScenariosSample EW5001 Wireless Bridge Application Scenario IP-TYPE Camera Systems Product Serial Number Label Placement Product Serial Number LabelSite Selection Mount InstallationSite Preparation Mount Description Required Adapter Maximum Load12 VDC 24 VAC Power and Network WiringMaximum Distance Wire Color AC+To install the network cable refer to on POWER-OVER-ETHERNET POE Ferrule Antenna Installation Bench Setup OptionalUnit Installation NUT Lock Washer Weatherproof Network Cable not Supplied Power from Source C2681M 2/08 Connect all cables refer to Figure Close and latch the EW5001 to the J-boxDisconnecting AN Antenna Cable Opening the J-BOXOperation IndicatorsStartup Phase Rssi Volts Rssi dB Antenna AlignmentStatus Change UnitConfiguration Troubleshooting Problem Possible Causes Suggested RemedySpecifications ECM100 Esprit corner mount with center feedthrough hole Esprit pole mount with center feedthrough holeProduct Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 52.65 Kb

EW5001 specifications

The Pelco EW5001 is a robust and highly advanced network video encoder designed for a variety of surveillance applications. This device is known for its reliability, flexibility, and a host of features tailored for efficient video management in security environments.

One of the primary features of the EW5001 is its capability to encode high-definition video streams. Supporting resolutions up to 1080p, it ensures that users receive clear and detailed images, which is essential for effective monitoring and identification purposes. The encoder leverages H.264 compression technology, which significantly reduces the bandwidth required for video transmission while maintaining high quality, allowing for more efficient storage and streaming.

Another key aspect of the EW5001 is its multi-stream output functionality. This means that each channel can stream multiple video streams simultaneously at different resolutions and bit rates, which accommodates various network conditions and user needs. Security personnel can monitor live feeds in real-time, while also saving high-resolution recordings for future review.

The easy integration of the Pelco EW5001 into existing network infrastructures is facilitated by its support for ONVIF (Open Network Video Interface Forum) protocols. This interoperability allows it to seamlessly connect with a wide range of third-party cameras and video management systems, enhancing the system's overall versatility.

For connectivity, the EW5001 is equipped with both Ethernet and PoE (Power over Ethernet) capabilities. This feature simplifies installation by allowing the device to receive both power and data over a single cable, reducing clutter and minimizing installation time. Moreover, built-in alarm input and output ports offer additional functionality for triggering alerts or integrating with other security systems when specific events occur.

In addition to its performance features, the Pelco EW5001 comes with advanced security measures. These include user authentication, encrypted transmission, and secure access protocols to help protect sensitive video data along its journey from the encoder to storage or viewing platforms.

With its combination of high-quality video encoding, flexible streaming options, easy integration, and robust security features, the Pelco EW5001 stands out as a vital component in modern surveillance setups, meeting the demands of various sectors including retail, transportation, and critical infrastructure protection. Its reliability and performance make it an excellent choice for those seeking to enhance their security systems with state-of-the-art technology.
Top Page Image Contents