Pelco EW5001 manual Configuration

Page 27

3.Point the antenna on the EW5001 toward the antenna on the other Endura wireless device.

4.Set the scale on the DVM for 0 VDC (zero VDC) to 6 VDC.

5.Uncap the RSSI connector on the EW5001 (refer to Figure 21).

NOTE: The cap is attached to the EW5001; you will reinstall it later to protect the unit from weather damage.

DIGITAL VOLTMETER

BNC CABLE

RSSI CONNECTOR

CAP

BNC ADAPTER

Figure 21. Connecting a DVM to the EW5001

6.Connect the DVM and a BNC adapter to the RSSI connector on the EW5001.

7.Adjust the antenna to achieve the best signal strength. The target is 3.3 VDC.

8.Tighten the antenna mounting hardware.

9.Disconnect the DVM and BNC adapter from the RSSI connector on the EW5001.

10.Reinstall the cap on the RSSI connector on the EW5001.

NOTE: Do not skip this step; you must reinstall the cap to protect the unit from weather damage.

11.Optional: Realign the antenna on the other Endura wireless device.

NOTE: Only realign the antenna if distance, weather, obstructions, or other factors are affecting signal strength.

CONFIGURATION

The EW5001 can be configured as an access point (default) or a bridge. To configure the EW5001, perform the following two steps:

1.Configure the network and wireless communication settings; refer to the supplied EW5001 Configuration manual (C2684M).

2.Configure the actual EW5001 Endura device settings; refer to the Endura WS5000 Advanced System Software Operation manual (C1624M).

Once configured, you can access the EW5001 the same way you access other Endura products. Refer to the Endura WS5000 Advanced System Software Operation manual (C1624M) for more information.

C2681M (2/08)

27

Image 27
Contents Endura EW5001 Wireless Access Point/Bridge Contents List of Tables List of IllustrationsRegulatory Notices Video Quality CautionExposure to Radio Frequency Fields Optional Accessories DescriptionModels Qty Description Parts ListBefore You Begin USER-SUPPLIED PartsPackage Contents Application Scenarios Sample EW5001 Access Point Application ScenarioSample EW5001 Wireless Bridge Application Scenario IP-TYPE Camera Systems Product Serial Number Label Product Serial Number Label PlacementMount Description Required Adapter Maximum Load Mount InstallationSite Preparation Site SelectionPower and Network Wiring Maximum Distance12 VDC 24 VAC AC+ Wire ColorTo install the network cable refer to on POWER-OVER-ETHERNET POE Ferrule Bench Setup Optional Antenna InstallationUnit Installation NUT Lock Washer Weatherproof Network Cable not Supplied Power from Source C2681M 2/08 Close and latch the EW5001 to the J-box Connect all cables refer to FigureOpening the J-BOX Disconnecting AN Antenna CableIndicators Startup PhaseOperation Unit Antenna AlignmentStatus Change Rssi Volts Rssi dBConfiguration Problem Possible Causes Suggested Remedy TroubleshootingSpecifications Esprit pole mount with center feedthrough hole ECM100 Esprit corner mount with center feedthrough holeProduct Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 52.65 Kb

EW5001 specifications

The Pelco EW5001 is a robust and highly advanced network video encoder designed for a variety of surveillance applications. This device is known for its reliability, flexibility, and a host of features tailored for efficient video management in security environments.

One of the primary features of the EW5001 is its capability to encode high-definition video streams. Supporting resolutions up to 1080p, it ensures that users receive clear and detailed images, which is essential for effective monitoring and identification purposes. The encoder leverages H.264 compression technology, which significantly reduces the bandwidth required for video transmission while maintaining high quality, allowing for more efficient storage and streaming.

Another key aspect of the EW5001 is its multi-stream output functionality. This means that each channel can stream multiple video streams simultaneously at different resolutions and bit rates, which accommodates various network conditions and user needs. Security personnel can monitor live feeds in real-time, while also saving high-resolution recordings for future review.

The easy integration of the Pelco EW5001 into existing network infrastructures is facilitated by its support for ONVIF (Open Network Video Interface Forum) protocols. This interoperability allows it to seamlessly connect with a wide range of third-party cameras and video management systems, enhancing the system's overall versatility.

For connectivity, the EW5001 is equipped with both Ethernet and PoE (Power over Ethernet) capabilities. This feature simplifies installation by allowing the device to receive both power and data over a single cable, reducing clutter and minimizing installation time. Moreover, built-in alarm input and output ports offer additional functionality for triggering alerts or integrating with other security systems when specific events occur.

In addition to its performance features, the Pelco EW5001 comes with advanced security measures. These include user authentication, encrypted transmission, and secure access protocols to help protect sensitive video data along its journey from the encoder to storage or viewing platforms.

With its combination of high-quality video encoding, flexible streaming options, easy integration, and robust security features, the Pelco EW5001 stands out as a vital component in modern surveillance setups, meeting the demands of various sectors including retail, transportation, and critical infrastructure protection. Its reliability and performance make it an excellent choice for those seeking to enhance their security systems with state-of-the-art technology.