Pelco EW5001 manual Ferrule

Page 17

To install PoE for the EW5001 (refer to Figure 8):

1.Install the PoE equipment (refer to the equipment documentation).

2.Run the network cable from the PoE equipment to the mount site. The equipment must support Gigabit Ethernet operation. NOTE: If you use a junction box or patch panel, make sure the connection is protected from the weather.

3.Install the supplied weatherproof network connector onto the network cable at the mount site (refer to Figure 9):

FERRULE

ADJUSTABLE SEAL

THRUST

WASHER

CAP

NETWORK CABLE AND CONNECTOR

CONNECTOR

SHELL

Figure 9. Assembling the Weatherproof Network Connector

a.Slide the small end of the connector cap onto the network cable.

b.Insert the RJ-45 connector firmly into the connector shell. Make sure the connector locks into place.

c.Snap the ferrule onto the cable between the cap and the connector shell. Make sure the small end of the ferrule points toward the cap.

d.Attach the compression gland to the cable between the ferrule and the connector shell. The gland is multilayered. If the hole is too small, remove the innermost layers one at a time until the gland fits the cable snugly.

e.Attach the thrust washer to the cable between the compression gland and the connector shell.

f.Gently slide the ferrule, gland, and washer into the connector shell.

g.Twist the cap tightly onto the connector shell. If the cap is loose, the connector could fail.

You will connect the weatherproof network connector to the EW5001 later (refer to Unit Installation on page 19).

C2681M (2/08)

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Endura EW5001 Wireless Access Point/Bridge Contents List of Tables List of IllustrationsExposure to Radio Frequency Fields Regulatory NoticesVideo Quality Caution Models Optional AccessoriesDescription Before You Begin Parts ListUSER-SUPPLIED Parts Qty DescriptionPackage Contents Application Scenarios Sample EW5001 Access Point Application ScenarioSample EW5001 Wireless Bridge Application Scenario IP-TYPE Camera Systems Product Serial Number Label Product Serial Number Label PlacementSite Preparation Mount InstallationSite Selection Mount Description Required Adapter Maximum Load12 VDC 24 VAC Power and Network WiringMaximum Distance AC+ Wire ColorTo install the network cable refer to on POWER-OVER-ETHERNET POE Ferrule Bench Setup Optional Antenna InstallationUnit Installation NUT Lock Washer Weatherproof Network Cable not Supplied Power from Source C2681M 2/08 Close and latch the EW5001 to the J-box Connect all cables refer to FigureOpening the J-BOX Disconnecting AN Antenna CableOperation IndicatorsStartup Phase Status Change Antenna AlignmentRssi Volts Rssi dB UnitConfiguration Problem Possible Causes Suggested Remedy TroubleshootingSpecifications Esprit pole mount with center feedthrough hole ECM100 Esprit corner mount with center feedthrough holeProduct Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 52.65 Kb

EW5001 specifications

The Pelco EW5001 is a robust and highly advanced network video encoder designed for a variety of surveillance applications. This device is known for its reliability, flexibility, and a host of features tailored for efficient video management in security environments.

One of the primary features of the EW5001 is its capability to encode high-definition video streams. Supporting resolutions up to 1080p, it ensures that users receive clear and detailed images, which is essential for effective monitoring and identification purposes. The encoder leverages H.264 compression technology, which significantly reduces the bandwidth required for video transmission while maintaining high quality, allowing for more efficient storage and streaming.

Another key aspect of the EW5001 is its multi-stream output functionality. This means that each channel can stream multiple video streams simultaneously at different resolutions and bit rates, which accommodates various network conditions and user needs. Security personnel can monitor live feeds in real-time, while also saving high-resolution recordings for future review.

The easy integration of the Pelco EW5001 into existing network infrastructures is facilitated by its support for ONVIF (Open Network Video Interface Forum) protocols. This interoperability allows it to seamlessly connect with a wide range of third-party cameras and video management systems, enhancing the system's overall versatility.

For connectivity, the EW5001 is equipped with both Ethernet and PoE (Power over Ethernet) capabilities. This feature simplifies installation by allowing the device to receive both power and data over a single cable, reducing clutter and minimizing installation time. Moreover, built-in alarm input and output ports offer additional functionality for triggering alerts or integrating with other security systems when specific events occur.

In addition to its performance features, the Pelco EW5001 comes with advanced security measures. These include user authentication, encrypted transmission, and secure access protocols to help protect sensitive video data along its journey from the encoder to storage or viewing platforms.

With its combination of high-quality video encoding, flexible streaming options, easy integration, and robust security features, the Pelco EW5001 stands out as a vital component in modern surveillance setups, meeting the demands of various sectors including retail, transportation, and critical infrastructure protection. Its reliability and performance make it an excellent choice for those seeking to enhance their security systems with state-of-the-art technology.
Top Page Image Contents