Pelco EW5001 manual Power-Over-Ethernet Poe

Page 16

POWER-OVER-ETHERNET (POE)

Power-over-Ethernet (PoE) lets you supply both power and network connectivity over a single cable. This simplifies installation and decreases the potential for unit failure.

The EW5001 supports PoE from either a PoE injector or a PoE-enabled network switch. The equipment must support Gigabit Ethernet and supply 15.4 W at 48 VDC. Unit power consumption is 9.7 W (16.2 VA). Approved gigabit PoE injectors are available from Pelco.

NOTE: For PoE operation, the unit must be reliably grounded when installed.

Figure 8 shows how to implement PoE on the EW5001 using a PoE injector.

WEATHERPROOF

NETWORK CONNECTOR

(SUPPLIED)

WEATHERPROOF

NETWORK CABLE POE INJECTOR (NOT SUPPLIED)

NETWORK

M odel

POWER SUPPLY

Figure 8. PoE Injector Configuration

The EW5001 requires a network cable that meets the following specifications:

•Weatherproof

•Silicon filled

•Cat5e or greater unshielded twisted pair (UTP)

•Long enough to reach the EW5001 from the PoE equipment, junction box, or patch panel, up to 328 ft (100 m)

Refer to Optional Accessories on page 5 for a list of approved cables of various lengths that can be purchased from Pelco.

16

C2681M (2/08)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Endura EW5001 Wireless Access Point/Bridge Contents List of Illustrations List of TablesVideo Quality Caution Regulatory NoticesExposure to Radio Frequency Fields Description Optional AccessoriesModels Parts List Before You BeginUSER-SUPPLIED Parts Qty DescriptionPackage Contents Sample EW5001 Access Point Application Scenario Application ScenariosSample EW5001 Wireless Bridge Application Scenario IP-TYPE Camera Systems Product Serial Number Label Placement Product Serial Number LabelMount Installation Site PreparationSite Selection Mount Description Required Adapter Maximum LoadMaximum Distance Power and Network Wiring12 VDC 24 VAC Wire Color AC+To install the network cable refer to on POWER-OVER-ETHERNET POE Ferrule Antenna Installation Bench Setup OptionalUnit Installation NUT Lock Washer Weatherproof Network Cable not Supplied Power from Source C2681M 2/08 Connect all cables refer to Figure Close and latch the EW5001 to the J-boxDisconnecting AN Antenna Cable Opening the J-BOXStartup Phase IndicatorsOperation Antenna Alignment Status ChangeRssi Volts Rssi dB UnitConfiguration Troubleshooting Problem Possible Causes Suggested RemedySpecifications ECM100 Esprit corner mount with center feedthrough hole Esprit pole mount with center feedthrough holeProduct Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 52.65 Kb

EW5001 specifications

The Pelco EW5001 is a robust and highly advanced network video encoder designed for a variety of surveillance applications. This device is known for its reliability, flexibility, and a host of features tailored for efficient video management in security environments.

One of the primary features of the EW5001 is its capability to encode high-definition video streams. Supporting resolutions up to 1080p, it ensures that users receive clear and detailed images, which is essential for effective monitoring and identification purposes. The encoder leverages H.264 compression technology, which significantly reduces the bandwidth required for video transmission while maintaining high quality, allowing for more efficient storage and streaming.

Another key aspect of the EW5001 is its multi-stream output functionality. This means that each channel can stream multiple video streams simultaneously at different resolutions and bit rates, which accommodates various network conditions and user needs. Security personnel can monitor live feeds in real-time, while also saving high-resolution recordings for future review.

The easy integration of the Pelco EW5001 into existing network infrastructures is facilitated by its support for ONVIF (Open Network Video Interface Forum) protocols. This interoperability allows it to seamlessly connect with a wide range of third-party cameras and video management systems, enhancing the system's overall versatility.

For connectivity, the EW5001 is equipped with both Ethernet and PoE (Power over Ethernet) capabilities. This feature simplifies installation by allowing the device to receive both power and data over a single cable, reducing clutter and minimizing installation time. Moreover, built-in alarm input and output ports offer additional functionality for triggering alerts or integrating with other security systems when specific events occur.

In addition to its performance features, the Pelco EW5001 comes with advanced security measures. These include user authentication, encrypted transmission, and secure access protocols to help protect sensitive video data along its journey from the encoder to storage or viewing platforms.

With its combination of high-quality video encoding, flexible streaming options, easy integration, and robust security features, the Pelco EW5001 stands out as a vital component in modern surveillance setups, meeting the demands of various sectors including retail, transportation, and critical infrastructure protection. Its reliability and performance make it an excellent choice for those seeking to enhance their security systems with state-of-the-art technology.
Top Page Image Contents