Pelco FR85011A manual Mounting the Transmitter/Receiver Using the Wall Clip

Page 15

Mounting the Transmitter/Receiver Using the Wall Clip

NOTE: Before mounting the FT85011A transmitter/FR85011A receiver to a wall, ensure that there is adequate space at both ends for viewing the front-panel LEDs and for making the various rear-panel cable connections.

To attach the FT85011A transmitter/FR85011A receiver to a wall using the supplied wall clip, refer to Figure 5 and do the following:

1.Using the two vertical or horizontal wall-mounting holes, attach the wall clip to a wall using two screws (not provided).

2.Slide the module into the clip until the two holes on the bottom of the module align with the two holes on the lower ﬂange of the clip.

3.Attach the module to the clip using the two Phillips pan head screws provided for the clip.

UPPER

FLANGE

VERTICAL

MOUNTING HOLE (2)

HORIZONTAL

TRANSMITTER/MOUNTING HOLE (2) RECEIVER

LOWER

SCREW, PHILLIPS WALL CLIPFLANGE

PAN HEAD WITH

LOCK WASHER (2)

Figure 5. Mounting the FT85011A Transmitter/FR85011A Receiver Using the Wall Clip

C2604M (7/06)

15

Image 15

Contents Fiber Transmitter Receiver Page Contents List of IllustrationsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Radio and Television Interference Regulatory NoticesDescription Product OverviewAddition, note the following Models Multimode ModelsSingle-Mode Models Data TX LED Data RX LED Video Present LED Front PanelRear Panel Installation Package ContentsData Communication Setup Data Communication Switch Setting Mounting the TRANSMITTER/RECEIVER Into a Rack MountingMounting the Transmitter/Receiver Using the Wall Clip Connections Figures 7-12 for Wiring Diagrams Coaxial CableRS-232 RS-422 WireBi-Phase Pin RS-485RS-232 Data Communication Wiring Device a Receiver RS-485 2-Wire Half Duplex Data Communication Wiring RS-485 4-Wire Full Duplex Data Communication Wiring Manchester Data Communication Wiring Bi-Phase Data Communication Wiring Video Present LED TroubleshootingSpeciﬁcations Meaning Possible Cause Corrective Action Optic Fault LEDData Rx LED Meaning Possible Cause Corrective Action Data Tx LEDVideo SpeciﬁcationsModel No Optical Maximum Laser CompatibleReceivers Wavelength Receiver Model No Optical Maximum Laser FR85011AC2604M 7/06 Product Warranty and Return Information ISO9001