Table C. Troubleshooting with
Indicator Color | Meaning | Possible Cause | Corrective Action |
|
|
|
|
|
| Optic Fault LED |
|
|
|
|
|
Green | The optical signal is | — | No action required. |
| being received and |
|
|
| laser is operating |
|
|
| properly. |
|
|
|
|
|
|
Red | The optical signal is | Remote fiber module is not | Check power connections. |
| not being received. | powered on. | Replace power supply if |
|
|
| necessary. |
|
|
|
|
|
| Fiber optic cable is not | Check fiber optic |
|
| connected. | connections. |
|
|
|
|
|
| Fiber optic cable connectors | Clean, polish, or replace fiber |
|
| are dirty or are damaged. | optic cable connectors as |
|
|
| necessary. |
|
|
|
|
|
| Fiber optic cable is | Replace cable. |
|
| defective. |
|
|
|
|
|
|
| Optical dB losses in the | Check for problems with the |
|
| fiber optic installation | fiber optic installation, for |
|
| exceed the optical power | example, excessive dB |
|
| budget specification stated | losses in connectors, splices, |
|
| in the Specifications | patch panels, cables, |
|
| section. | and so on. |
|
|
|
|
|
| Optical dB losses in the | Contact Product Support. |
|
| fiber optic installation meet |
|
|
| the optical power budget |
|
|
| specification stated in the |
|
|
| Specifications section; |
|
|
| however, a fiber module is |
|
|
| defective. |
|
|
|
|
|
Flashing red | Laser has shut down. | Fiber module is operating in | Ensure that fiber module |
|
| extreme environmental | operates according to |
|
| conditions; for example, | operating conditions stated |
|
| operating temperature is | in the Specifications section, |
|
| below or above recom- | and then cycle the power. |
|
| mended range as stated in | If problem persists, contact |
|
| the Specifications section. | Product Support. |
|
|
|
|
|
| Laser has reached end of | Cycle the power. If problem |
|
| life. | persists, contact Product |
|
|
| Support. |
|
|
|
|
|
|
| (Continued on next page) |
C2604M (7/06) | 25 |