Sun Microsystems X4100 M2, X4200 M2 manual Attaching the Slide-Rail Assemblies to the Rack

Attaching the Slide-Rail Assemblies to the Rack

Use this procedure to install the slide-rail assemblies to the rack.

1. Position a slide-rail assembly in your rack so that the brackets at each end of the slide-rail assembly are on the outside of the front and rear rack posts. See FIGURE 1-3.

2.Attach the slide-rail assembly to the rack posts.

The method used to attach the slide-rails varies depending on the type of rack:

■If your rack has threaded mounting holes in the rack posts, first determine whether the threads are metric or standard, then insert the correct mounting screws through the slide-rail brackets and into the threaded holes.

■If your rack does not have threaded mounting holes, insert the mounting screws through both the slide-rail brackets and rack posts, then secure them with the caged nuts.

Rack post

Slide-rail assembly bracket on outside of rack post

Slide-rail assembly with mounting bracket removed

FIGURE 1-3Slide-Rail Assembly Mounting to Rack Post

3. Repeat the procedure for the remaining slide rail assembly.

Chapter 1 Setting Up the Server Hardware 5