Sun Microsystems X4200 M2, X4100 M2 manual Installation Worksheet, Worksheet for Installation

Installation Worksheet

Use the worksheet in TABLE 1 to gather the information you need to configure the preinstalled Solaris 10 OS. You need to collect only the information that applies to your application.

TABLE 1 Worksheet for Installation

			Your Answers:
			Defaults are noted
Information for Installation		Description or Example	with an asterisk. (*)
Language		Choose from the list of available languages for the	English*
		Solaris 10 software.
Locale		Choose your geographic region from the list of available	English (C - 7-bit
		locales.	ASCII)*
Terminal		Choose the type of terminal that you are using from the
		list of available terminal types.
Network connection		Is the system connected to a network?	• Networked
			• Non-networked*
DHCP		Can the system use Dynamic Host Configuration	• Yes
		Protocol (DHCP) to configure its network interfaces?	• No*
If you are not	IP address	If you are not using DHCP, supply the IP address for the
using DHCP,		system.
note the network		Example: 129.200.9.1
address:
	Subnet	If you are not using DHCP, is the system part of a	255.255.0.0*
		subnet?
		If yes, what is the netmask of the subnet?
		Example: 255.255.0.0
	IPv6	Do you want to enable IPv6 on this machine?	• Yes
			• No*
Host name		A host name that you choose for the system.
Kerberos		Do you want to configure Kerberos security on this	• Yes
		machine? If yes, gather the following information:	• No*
		Default Realm:
		Administration Server:
		First KDC:
		(Optional) Additional KDCs:

32 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Installation Guide • May 2007