Sun Microsystems X4200 M2, X4100 M2 manual Configuring Ilom Using Static Ethernet Settings

Page 34

Configuring ILOM Using Static Ethernet Settings

As an alternative to having your DHCP server assign an IP address to your ILOM SP, you can also assign a static IP address to it. You can do this by using the web GUI, by using the CLI over the network or serial port, or by using the server’s BIOS Setup Utility. Use the procedure you prefer.

■“Configuring Static IP Addresses Using the Web GUI” on page 26

■“Configuring Static IP Addresses Using the CLI” on page 27

■“Configuring Static IP Addresses Using the BIOS Setup Utility” on page 28

Configuring Static IP Addresses Using the Web GUI

1.Determine the current IP address of the ILOM SP from one of the following locations:

■CLI command. The SP has a serial port to which you can attach a terminal device. If you log in to the SP and enter the CLI command show /SP/network, the SP displays the current IP address.

■The system BIOS setup screen. Press F2 during bootup, then choose Advanced → IPMI 2.0 Configuration → Set LAN Configuration → IP address.

2.Connect to the ILOM SP through a web browser running on a remote system.

3.Log in to the web GUI using the default user name, root, and the default password, changeme.

4.Choose the Configuration tab and its Network tab to display information about the current network configuration of your ILOM SP. See FIGURE 2-4.

5.Select the Use the Following IP Address option and type your static IP address information. See the example in FIGURE 2-4.

26 Sun Fire X4100/X4100 M2 and X4200/X4200 M2 Servers Installation Guide • May 2007

Image 34

Contents Sun Microsystems, Inc Page Contents Index Preface Related DocumentationUsing Unix Commands Product UpdatesThird-Party Web Sites Typographic Conventions Sun Welcomes Your CommentsPage Setting Up the Server Hardware Installation OverviewInstalling the Server Into a Rack With Optional Slide Rails Disassembling the Slide Rails Before Installation Unpack the slide-railsInstalling the Mounting Brackets Onto the Server Mounting bracket3Slide-Rail Assembly Mounting to Rack Post Attaching the Slide-Rail Assemblies to the RackInstalling the Server Into the Slide Rail Assemblies Installing the Cable Management Assembly CMA rail extension Left slide-rail Right slide-rail CMA mounting bracket CMA extension arm On left slide-rail Tab CMA arm connector 10Installing CMA Cable Hangers Attaching and Routing CablesVerifying Operation of the Slide Rails and CMA Cabling NET MGTSun Fire X4100/X4200 servers Continue with Powering On and Off the Server on Powering On and Off the Server Powering On Main Power Mode Shutting Down Main Power ModePage Setting Up the Server Software Introduction to the Integrated Lights Out ManagerPage Connecting to the Ilom Service Processor Connecting to Ilom Using a Serial ConnectionTo start the serial console, you can type cd /SP/console Connecting to Ilom Using an Ethernet Connection Configuring Ilom Ethernet Settings Using Dhcp# ssh -l root 2Opening a Session With an SSH Command-Line Interface Configuring Ilom Using Static Ethernet Settings Configuring Static IP Addresses Using the CLI Configuring Static IP Addresses Using the Bios Setup Utility Setting Up Platform Operating System and Driver Software Page Configuring the Preinstalled Solaris 10 Operating System Before You BeginInstallation Worksheet Worksheet for InstallationConfiguring the Preinstalled Solaris 10 Operating System Worksheet for Installation Selecting Your Console Output ExampleConfiguring the Preinstalled Solaris 10 Operating System To Connect to the Server Using a Terminal Program onSelect the IP Address menu item To Connect to the Server Using a Terminal Program Follow the Solaris 10 preinstallation on-screen promptsDownloading Solaris 10 OS Software Solaris 10 User DocumentationSolaris 10 OS Training Page Index Ilom

Related manuals

Manual 48 pages 15.89 Kb