Sun Microsystems manual Cluster Platform 4500/3 User’s Guide July

4.Modify the default IP address that will be used in your network. Use the addr command to modify the network configuration of the terminal concentrator. Use the addr -dcommand to verify the network configuration:

monitor:: addr

Enter Internet address [0.0.0.0]:: 192.212.87.62

Internet address: 192.212.87.62

Enter Subnet mask [255.255.0.0]:: 192.255.255.0

Subnet mask: 192.255.255.0

Enter Preferred load host Internet address [<any host>]:: 0.0.0.0

Preferred load host address: <any host>0.0.0.0

Enter Broadcast address [0.0.0.0]:: 192.212.87.255

Broadcast address: 192.212.87.255

Enter Preferred dump address [0.0.0.0]:: 0.0.0.0

Preferred dump address: 0.0.0.0

Select type of IP packet encapsulation (ieee802/ethernet) [<ethernet>]:: ethernet

Type of IP packet encapsulation: <ethernet> :: ethernet

Load Broadcast Y/N [Y]:: N

Load Broadcast: N

monitor:: addr -d

Ethernet address (hex): 00-80-2D-ED-21-23

Internet address: 192.212.87.62

Subnet masks: 192.255.255.0

Preferred load host address: <any host>

Broadcast address: 192.212.87.255

Preferred dump address: 0.0.0.0

Type of IP packet encapsulation: <ethernet>

Load Broadcast: N

monitor:: sequence

Enter a list of 1 to 4 interfaces to attempt to use for downloading code or upline dumping. Enter them in the order they should be tried, separated by commas or spaces. Possible interfaces are:

Ethernet: net

SELF: self

Enter interface sequence [net]:: self

Interface sequence: self

5.Copy the Ethernet address entered above for the terminal concentrator, and add it to “Ethernet IP Address Worksheet” on page 8 for later reference when configuring the cluster.

20 Cluster Platform 4500/3 User’s Guide • July 2001