16.Select Dynamic Host Configuration Protocol (DHCP) services.
Because the management server must have a fixed IP address and name recognized by outside clients, DHCP is not supported:
On this screen you must specify whether or not this system should use DHCP for network interface configuration. Choose Yes if DHCP is to be used, or No if the interfaces are to be configured manually.
WARNING: Because this machine booted from the network, DHCP support will not be enabled, if selected, until after the system reboots.
Use DHCP
[ ] Yes [X] No
<esc>2
17.Select the primary network interface.
The management server configuration uses eri0 as the default primary network interface:
On this screen you must specify which of the following network adapters is the system’s primary network interface. Usually the correct choice is the lowest number. However, do not guess; ask your system administrator if you’re not sure.
>To make a selection, use the arrow keys to highlight the option
and
press Return to mark it [X].
Primary network interface
[X] eri0 [ ] eri1
<esc>2