3.Configure the Sun StorEdge T3 array shared disk storage, using the Solstice DiskSuite software.
Solstice DiskSuite configuration involves creating disksets, metadevices, and file systems. (Refer to the included Solstice DiskSuite documentation.)
4.Select a quorum device to satisfy failure fencing requirements for the cluster. (Refer to the included Sun Cluster 3.0 documentation.)
5.Install and configure the highly available application for the cluster environment. (Refer to the Sun Cluster 3.0 documentation.)
6.Establish resource groups, logical hosts, and data services to enable the required application under the Sun Cluster 3.0 infrastructure. (Refer to the Sun Cluster 3.0 documentation.)
Your customized Cluster Platform 4500/3 is completed.
Cluster Platform 4500/3 Recovery
The recovery CDs enable you to replace the
Caution
These CDs are intended only for recovering from a disaster. They are not needed for initial installation and configuration of the Cluster Platform 4500/3 management server.
Before You Begin Recovery
Before you attempt to restore the management software environment, you must know your system configuration information and the state of your system backups. See TABLE
Your system configuration information must include the following:
■System name
■IP address
■Time zone
■Name service
■Subnet information