4.2Hardware Descriptions
4.2.1Ethernet Management Port
The ARTM-HD provides one 10/100/1000 MBASE-T ethernet management port with an RJ-45 connector equipped with LEDs.
4.2.2Infinband-style Connectors
The ARTM-HD provides two (primary and secondary) Infinband-style SAS connectors, with jack screws, for external drive support using a SFF-8470 style SAS cable.
4.2.3Serial Port
One asynchronous serial port with an RJ-45 serial connector is included on the ARTM-HD I/O faceplate. The serial port may be redirected to the front blade server when using a Netra CP3220 board, a Netra CP3260 board, or other ARTM -compatible blade server. For more information on using both the front and rear serial ports, refer to the appropriate blade server documentation.
4.2.4SAS Interface
The ARTM-HD includes a LSI 1068E PCIe to 8-port SAS controller chip.
4.2.5Module Management Controller
The onboard Module Management Controller (MMC) provides IPMI management communication between the RTM and the blade server, and local monitoring of temperature and voltage.
Chapter 4 Specifications and Connectors | 4-3 |