Sun Microsystems X1150A manual Operational Mode Parameters

Parameter

adv-autoneg-cap

adv-1000fdx-cap

adv-1000hdx-cap

adv-100T4-cap

adv-100fdx-cap

TABLE 4-2

TABLE 4-2

TABLE 4-1ce Driver Parameter, Status, and Descriptions (Continued)

Parameter Status Description

red-dv4to6k	Read and write
red-dv6to8k	Read and write
red-dv8to10k	Read and write
red-dv10to12k	Read and write
tx-dma-weight	Read and write
rx-dma-weight	Read and write
infinite-burst	Read and write
disable-64bit	Read and write

Random early detection and packet drop vectors Random early detection and packet drop vectors Random early detection and packet drop vectors Random early detection and packet drop vectors PCI Interface parameter

PCI Interface parameter

PCI Interface parameter

PCI Interface parameter

Operational Mode Parameters

The following parameters determine the transmit and receive speed and duplex. describes the operational mode parameters and their default values.

Operational Mode Parameters

Description

Local interface capability advertised by the hardware 0 = Forced mode

1 = Autonegotiation (default)

Local interface capability advertised by the hardware

0= Not 1000 Mbit/sec full-duplex capable

1= 1000 Mbit/sec full-duplex capable (default)

Local interface capability advertised by the hardware

0= Not 1000 Mbit/sec half-duplex capable

1= 1000 Mbit/sec half-duplex capable (default)

Local interface capability advertised by the hardware 0 = Not 100T4 capable (default)

1 = 100T4 capable

Local interface capability advertised by the hardware

0= Not 100 Mbit/sec full-duplex capable

1= 100 Mbit/sec full-duplex capable (default)

Chapter 4 Configuring Driver Parameters 39