Sun Microsystems X1150A manual 10Read-Only ce Device Capabilities

TABLE 4-10describes the read-only Media Independent Interface (MII) capabilities. These parameters define the capabilities of the hardware. The Gigabit Media Independent Interface (GMII) supports all of the following capabilities.

TABLE 4-10Read-Only ce Device Capabilities

Parameter	Description (Local interface Capabilities)
cap_autoneg	0 = Not capable of autonegotiation
	1	= Autonegotiation capable
cap_1000fdx	Local interface full-duplex capability
	0	= Not 1000 Mbit/sec full-duplex capable
	1	= 1000 Mbit/sec full-duplex capable
cap_1000hdx	Local interface half-duplex capability
	0	= Not 1000 Mbit/sec half-duplex capable
	1	= 1000 Mbit/sec half-duplex capable
cap_100fdx	Local interface full-duplex capability
	0	= Not 100 Mbit/sec full-duplex capable
	1	= 100 Mbit/sec full-duplex capable
cap_100hdx	Local interface half-duplex capability
	0	= Not 100 Mbit/sec half-duplex capable
	1	= 100 Mbit/sec half-duplex capable
cap_10fdx	Local interface full-duplex capability
	0	= Not 10 Mbit/sec full-duplex capable
	1	= 10 Mbit/sec full-duplex capable
cap_10hdx	Local interface half-duplex capability
	0	= Not 10 Mbit/sec half-duplex capable
	1	= 10 Mbit/sec half-duplex capable
cap_asm_pause	Local interface flow control capability
	0	= Not asymmetric pause capable
	1	= Asymmetric pause (from the local device) capable
cap_pause	Local interface flow control capability
	0	= Not Symmetric pause capable
	1	= Symmetric pause capable

Chapter 4 Configuring Driver Parameters 55