C H A P T E R 2
Installation
This chapter describes how to install the hub in a cabinet.
2.1Inspecting the Hub
1.Unpack the hub.
2.Inspect the hub for evidence of damage.
If damaged, keep all contents and packing materials for the carrier’s agent to inspect.
3.Save the packing materials for future use.
2.2Rackmount Placement
Rackmount placement information for the hub, as well as other devices that can be mounted in Sun system and expansion cabinets, is now available through the Web at:
http://docs.sun.com
Click on “Storage and Peripherals” in the Hardware section and open the Rackmount Placement Matrix.
If you do not have access to the Web, contact your Sun service provider.
Retrieve the placement information for the disk array before beginning the installation.