Sun Microsystems X6250 manual Adding Drivers to a RIS Image, To Add Drivers to a RIS Image

b.Find the image to service. Right-click the image and then click Replace Image. Follow the Wizard directions to replace the service image with the Windows image that was updated.

c.Right-click the service image and then click Enable.

The service image is now available and all the server-specific drivers are added to the image.

Adding Drivers to a RIS Image

For remote installation of Windows Server 2003 using a server running Windows Remote Installation Services, the mass storage controller driver must be incorporated for the operating system to be installed. You must update the RIS image with the mass storage controller driver available with DriverPack.zip.

Before you Begin

Before creating a RIS image, you need to do the following:

■Windows Remote Installation Services must be are running on a Windows Server. Read Microsoft’s Windows Remote Installation Services documentation for more information.

■Locate DriverPack.zip for Windows Server 2003. For more information, see Downloading Server-Specific Driver Packages.

▼To Add Drivers to a RIS Image

In the following procedure, %RIS_Image% refers to the root of your Windows image on the RIS server.

1.Create the following directories in RIS_Image (root of your Windows image on the RIS server.):

■$OEM$\textmode

■$OEM$\$1\Sun\Drivers

2.Extract the contents of DriverPack.zip to a temporary location, making sure to maintain the directory structure.

3.Update the RIS_Image with the platform-specific drivers:

Chapter 9 Incorporating Sun Blade X6250 Server Module Drivers Into WIM or RIS Images 63