Sun Microsystems 2000E installation manual Off

1

!

!

CAUTION	Risk of equipment damage. To reduce
	the risk, follow the instructions.
AC	A terminal to which alternating
	current or voltage may be applied.
ON	The principal and stand-by switches
	are in the ON position.
OFF	The principal switch is in the OFF
	position.
STAND-BY	The stand-by switch is in the
	STAND-BY position.
PROTECTIVE EARTH	Protective earth conductor.
CHASSIS	Frame or chassis terminal.
FUSE REPLACEMENT	For continued protection against risk
MARKING	of fire and electric shock, replace
	ONLY with same type and rating of
	fuse.

!

!

Caution – DO NOT make mechanical or electrical modifications to the cabinet. Sun Microsystems is not responsible for regulatory compliance of modified cabinets.

Caution – Power off the cabinet and all equipment connected to it before performing any of the procedures described in this book.

The system chassis power must be turned off, and the AC power cord must remain plugged in to ensure a proper ground.

Before You Start 1-3