Sun Microsystems 2000E installation manual 17Connecting the Power Cords

2

b.Replace the three Phillips screws and two #6-32 Phillips screws.

c.Replace cables in connectors J2 and J3.

1.Plug in the three power cords: See Figure 2-17.

a.Plug the main power cord into the AC distribution box J2 and the other end into breaker box J1 (bottom-right jack).

b.Plug power cord Part Number 530-2160-xx into breaker box J2 (top jack) and the other end into the top power supply AC input.

c.Plug power cord Part Number 530-2160-xx into breaker box J3 (bottom- left jack) and the other end into the bottom power supply AC input.

Top power supply

Breaker box

Bottom power supply

J3

AC distribution unit

Power cords

J2 (hidden)

Figure 2-17Connecting the Power Cords

Note – Examine the breaker box to ensure both circuit breakers are ON. Set them to ON if required.

Power Supply Installation 2-17